Craftin Desert Divas!, Friendship Cards, Just Because Cards, Uncategorized

Let’s Get Coloring! Craftin Desert Divas Designer Challenge!

Hey lovelies!
Today I’m taking part in the Craftin Desert Divas Let’s Get Colouring Designer Creative Challenge! Where some of the CDD design team are sharing tips and tricks on how they colour their stamped images, so be sure to head over to the Craftin Desert Divas blog post where each designer is highlighted!

I decided to use alcohol markers to colour my image today, when I first started card making just over a year ago, I found using alcohol markers really intimidating as I had never used them before! I’ve found though that practice really is the key to finding how you like colouring with them! If like me you’re using Spectrum Noir markers, I would definitely suggest making a swatch sheet of the pens you own, it’ll make it easier for you to see which colours would likely go together! Today I’ll be sharing how I find it works best for me with the Spectrum Noir alcohol markers.

1.jpg
I always start by stamping two of the image I want to colour, that way if I make a mistake I have another one ready! Today I’ll be colouring this adorable bunny chasing the butterfly from the brand new Brighter Days set from Craftin Desert Divas.
2.jpg3.jpg4.jpg
My general rule of thumb is to start with my darkest shade, blend it out slightly with my medium shade then finish by blending in my lightest shade. For the bunny’s face/ears/hands I used: IG5, GG2 & GG1.
5.jpg678.jpg
Moving on to the clothes, I stick to the same rule of darkest > lightest but for the yellows and blues I only use two of each shade. For the yellows I used: GB3 & LY1 and for the blues I used: GT2 & IB1. If you don’t have a medium shade and the two colours you have are too far from each other to blend, you can try touching the tip of your dark marker to your light one to create a medium shade!
9.jpg10.jpg
I used TN3 to colour my net, as it’s such a thin area there isn’t need for much shading on it. For the bunny’s little squirrel friend I used: TN5 & TN3 for the darker area of his fur and for the lighter areas I used: TN3 as my darkest and TN1 as my lightest. For the butterfly I blended an orange marker: OR2 and a yellow: LY1 for the main part of the wings, the dot details and the butterfly’s body were coloured using IG5. I coloured the inside of the bunny’s mouth using IG5 too, and then used CR9 and CR4 for their tongues.
11.jpg
I then added some rosy cheeks using a pink coloured pencil, and added dotting details and highlights using a white permanent chalk pen.
12.jpg
I fussy cut my image out and set it aside while I assembled the rest of my card.

I started with my background panel by die cutting a panel using the largest of the Crazy Stitched Frame Dies from heavyweight white card stock. I splattered it with distress ink by laying some ink down on my craft mat and diluting it with water before picking it up with a paint brush, to splatter it I simply held the brush above my panel and tapped on it lightly. I used peacock feathers and mustard seed on their own, then mixed them to create the green splatter. I set that aside to dry while I worked on the “grass” the critters are running on.
I cut another piece of white card stock using the largest of the Crazy Stitched Frame Dies, then cut the stitched border across it using a die from the Shake It Up Dies set. I then took mowed lawn and blended it on my card stock using an ink blending tool before setting it quickly with a heat tool so I could move on to embossing my sentiment. I prepped my grass panel with my powder tool applicator, stamped my sentiment “Sending HUGS” from the Wishful Thoughts stamp set with Versamark ink, coated it with white embossing powder and set it with my heat tool.
I adhered my grass panel to my splattered panel using double sided tape and popped the bunny up with double sided foam tape at the right side of the panel. I created my card base and cut down some yellow spotted patterned paper and adhered it to my base using score tape, before backing my entire panel with double sided foam tape and adhering it to my card base.

CDD DT Coloring Challenge July 18

Thanks for stopping by lovelies! ❤
Remember to head on over to the Craftin Desert Divas Blog to check out what the other Design Team members have created!

xo

Craftin Desert Divas
Shop

Supplies
Brighter Days Stamp Set
Wishful Thoughts Stamp Set
Crazy Stitched Frame Dies
Shake It Up Dies
Powder Tool Applicator
Versamark Ink

♥ Please note that the links to products and the CDD shop are affiliate links. If you choose to make a purchase through these links I will receive a small commission. ♥

36901571_10160798146590271_7415108762773487616_o

 

 

 

 

Advertisements
Anniversary Cards, Birthday Cards, Friendship Cards, Get Well Soon Cards, Uncategorized

Simple Elegant Cards Using Spellbinders Shapeabilities Dies From The “Flower Garden” Collection!

Hey lovelies! ❤ I’m back with a couple more cards using the Spellbinders Shapeabilities dies, this time from the Flower Garden collection by Sharyn Sowell! I tried to keep these cards similar while changing things up just a little, I’ve been on a white and gold kick lately and these dies fit that style perfectly! 

~Tools and products used will be listed at the end of this blog post!~

34258697_2123865487641276_3355361999348301824_n

“Botanical Butterfly”

34306531_2123866050974553_2293815382797975552_n.jpg

34416393_2123866110974547_787100216380620800_n

I created my A2 card base and cut my panel slightly smaller from white heavyweight card stock. I prepped my panel with my EK Success powder tool so my embossing powder would only stick to where I wanted it to. I took a thin embossing folder I got from a magazine a little while ago and coated the inside with Tsukineko Versamark ink (on the side with no ridges! This is so the embossed part would remain mostly white with only a little bit of gold looking slightly distressed on it!). I placed it towards the bottom of my panel and ran it through my die cutting machine before coating it in Papermania gold embossing powder and setting it with my heat tool. Once the embossing had cooled I took some gold peel offs from Love From Lizi and adhered them at the top and bottom of the gold embossed strip to neaten up the edges and give it an extra little shine. I then covered the embossed strip and the bottom of the panel in post it tape to protect it while I splattered some gold and white gold watercolour paint at the top of the panel. 

Once the splatter was dry I removed the post it tape and prepped the white space at the bottom of the card with my powder tool once again. I stamped my sentiment in Tsukineko Versafine onyx black ink in the bottom right corner of my panel, covered it in Papermania clear embossing powder and set with my heat tool. 

I grabbed some pretty floral pearlescent patterned paper from my stash and used the Botanical  Butterfly etched dies to cut out the body and wings using my die cutting machine (I ran the wings through twice so I could double them up as I knew I wanted some dimension here). Once all my pieces were ready, I took some strong double sided score tape and adhered the bottom wing, body and antenna with it over the left side of the embossed strip. I put some of the same double sided score tape on the top wing (where the wing joins to the butterfly) and used some mini foam squares to pop up the end of the wing to give some dimension. To finish I backed the entire panel in double sided foam tape and adhered to my card base. 

“Botanical Dragonfly”

34342585_2123865870974571_6366252026531151872_n.jpg

34189155_2123865964307895_9041766298295468032_n.jpg

Once again I went with an A2 card base with a slightly smaller panel from heavyweight white card stock. This time I protected a strip of my panel along the bottom first and splattered again with gold and white gold metallic watercolour paint. I removed the post it tape once the splatter was dry and went with the gold peel offs on their own, choosing two different widths to work with this time. I placed a two of the medium sizes and placed a thinner one in the middle, to give that same sense of separation I have on the first card.

I used the same floral paper as I did with the butterfly, to cut out the botanical dragonfly using my die cutting machine. Again, I ran the wings through twice only this time I turned my paper over so I could create the wings for both sides of the dragonfly. I adhered the two lower wings to my panel using my double sided tape as I wanted them to be flat, for the two top wings I adhered the part that would be behind the dragonfly’s body with score tape and popped up the ends with mini foam squares. I adhered the dragonfly’s body down the middle of my wings, using score tape directly on top of the wings and a mini foam square to support the back of the dragonfly’s head. 

I took some black card stock and prepped it with my heat tool, I stamped my sentiment from Altenew’s Carousel stamp set in Tsukineko Versamark ink, coated it in Altenew pure white embossing powder and set it with my heat tool. I cut the sentiment in to a thin strip using my paper trimmer and adhered it across my dragonfly using the double sided score tape. I then backed the entire panel in double sided foam tape and adhered to my card base to finish up!

34337250_2123865804307911_2615676744446771200_n

Thanks for reading lovelies! I had a lot of fun playing with these dies, I want to say a special thanks to Spellbinders for reaching out to me once again and giving me this wonderful opportunity! The dies themselves are absolutely beautiful and great for making beautiful cards year round, no matter the occasion! The detail in these dies specifically had me in awe! Which of the two dies is your favourite? 

xo

~Supplies & Links~

**Not all supplies can be listed as they’re from local craft stores, but you can easily find similar things online as they’re pretty common!**

DIES:

Spellbinders Shapeabilities Botanical Butterfly Etched Dies 

Spellbinders Shapeabilities Botanical Dragonfly Etched Dies

STAMPS:

Altenew Carousel 

CARDSTOCK/PAPER: 

Hobbycraft White Premium Smooth Card Stock (300gsm)

INKS:

Tsukineko Versafine Onyx Black Ink

Tsukineko Versamark “Watermark” Ink

POWDER TOOL:

EK Success Powder Tool

FOAM TAPE:

3M Scotch R Double Sided Foam Tape

DIE CUTTING MACHINE:

Sizzix Big Shot

PAPER TRIMMER:

Tonic Studios Guillotine Trimmer

EMBOSSING POWDER:

Altenew Pure White

Papermania Clear

HEAT TOOL:

Papermania Multi-Purpose Heat Tool

WATERCOLOUR PAINT:

Gansai Tambi “Starry Colors”

EMBELLISHMENTS:

Love From Lizi Gold Peel Offs