Halloween Cards, Uncategorized

Simple Halloween Card Using Simon Says Stamp “If The Hat Fits”!

Hey lovelies!
Back to the Halloween cards today! Now I know not a lot of people have hours and hours to spend making their cards for every occasion, so today I thought I’d share a really simple way of making cute cards fast! The “If The Hat Fits” set from Simon Says Stamp is a really amazing set to achieve simple but fun cards, the hat images are a great size for a focal point and the larger sentiments compliment them perfectly!
1.jpg
I had previously stamped out this set using Memento Tuxedo Black ink as I knew I wanted to use it for this year’s Halloween cards. I did some quick colouring using my Spectrum Noir alcohol markers and added details/highlights with my white gelly roll pen.
Spectrum Noir markers used:
Hat: LG5, LG3, LG2
Ribbon: CR7, OR2, FS9
2.jpg
I fussy cut out my image, I used my craft knife to cut the little piece between the bend of the hat and the ribbon. I cut down a panel for my card and blended in a circular motion towards the bottom left using Squeezed Lemonade Distress Oxide ink (I just love how greens and yellows compliment each other!), sprayed it with my distress sprayer before cleaning up any excess water with a paper towel. I splattered my panel with black watercolour paint and Twisted Citron Distress Oxide ink using a paintbrush and some water then allowed it to completely dry. Once it was dry I prepped my panel with my EK Success powder tool, I stamped my sentiment at a slight angle using Versafine Onyx Black ink, coated it in clear embossing powder and set with my heat tool. I stamped a couple of the stars from the set with Versafine ink to draw attention to my sentiment. I adhered the hat to my panel using double sided foam tape to add some dimension. Finally I framed my panel using black card stock and adhered to my card base using double sided score tape!
41467991_1218905581585412_4900616160715735040_n.jpg
Thanks for reading lovelies!
How are your Halloween crafts coming along? Have you started or do you prefer to move straight on to Christmas? For me this is the season I wait for every year with crafting, watching all my favourite movies and decorating our space to fit the theme!

xo

Supplies:

Stamps:
Simon Says Stamp “If The Hat Fits” Stamp Set

Card:
Hobbycraft White Premium Smooth Card(300gsm)
Hobbycraft Black Premium Card(180gsm)

Inks:
Squeezed Lemonade Distress Oxide Ink
Twisted Citron Distress Oxide Ink
Versafine Onyx Black Ink
Memento Tuxedo Black Ink

Embossing Powder:
Papermania Clear

Embellishments:
Sakura Gelly Roll Medium Point Pen(White)

Tools:
Tonic Studios Guillotine Trimmer
3M Scotch R Double Sided Foam Tape
EK Success Powder Tool Applicator
Papermania Heat Tool
Ranger Mini Ink Blending Tool

Advertisements
Friendship Cards, Halloween Cards, Uncategorized

Witch Way To The Candy? Cute Halloween Card Using Newton’s Nook “Boo-tiful Night” Set! (Inky Paws Challenge #80)

Hey lovelies!
Today I’m sharing this cute Halloween card I made for Newton’s Nook “Inky Paws” challenge! You can check out more about the challenge here! For this challenge you have to follow a card sketch, which is something I’ve never done before! Of course I had to make the theme of my card Halloween – we all know I’m on a Halloween kick lately and I doubt I’ll stop making Halloween cards until November at this rate!
1.jpg
To start I stamped this cute little witch cat using Memento Tuxedo Black ink and coloured him in using my Spectrum Noir alcohol markers. I added rosy cheeks with a pink coloured pencil and highlights with my white gelly roll pen.
Spectrum Noir colours used:
Cat: (Fur) IG5, GG2, GG1 (Nose) CR2 (Ears) CR2, FS8
Broom: TN5, TN3, GB6, GB1, CR7, OR3, OR2
Hat: BG5, BG3, CR7, OR3, OR2
2
Once I had fussy cut out my image, I cut down a panel from heavy white card stock. I made a smaller panel the same width and cut across it diagonally, I blended Carved Pumpkin Distress Oxide ink on to my diagonal strip, sprayed it with my distress sprayer and dried any excess water with a paper towel. I dried the ink with my heat tool before stamping the small bat from the stamp set in a pattern using Versafine Onyx Black ink. I took another piece of white card stock and ran it through my die cutting machine with the medium Inside Scalloped Circle die from Craftin Desert Divas. I took the inner piece of the die cut and blended Squeezed Lemonade Distress Oxide ink all over, I also blended the smallest amount of Carved Pumpkin Distress Oxide ink over the edges for a little more dimension.
3.jpg4.jpg
I took my white panel and splattered it with Carved Pumpkin Distress Oxide ink and black watercolour paint. Once that was dry I prepped my panel with my EK Success Powder Tool Applicator. I stamped my sentiment using Versafine Onyx Black ink, coated it in clear embossing powder and set it with my heat tool.
5.jpg6
I adhered my diagonal strip with the bats and my black ribbon to my panel using double sided score tape. I took a long piece of black and white twine and cut it in to two pieces, adhering one end of each to the back of my panel (the shorter side to the right), I brought them both together over the front of my diagonal strip and tied them in a little bow. To finish my panel I popped the circle and cat up on some foam tape to add dimension to my card! I framed my panel using some black paper and adhered it to my card base.
41008071_309490073188431_3160495961579454464_n.jpg
Thanks for reading lovelies! I really love how this card turned out, it’s possibly my favourite Halloween card I’ve made so far this year! (I have a few more posts coming soon!) The images in this stamp set are some of my favourite Halloween stamps I own, and I’m for sure getting a lot of use out of them this year!

xo

Newton’s Nook Inky Paws:
Inky Paws Challenge #80 Blog Post

Supplies:

Stamps & Dies:
Newton’s Nook “Boo-tiful Night” Stamp Set
Craftin Desert Divas Inside Scalloped Circle Dies

Cards & Papers:
Hobbycraft White Premium Smooth Card(300gsm)
Hobbycraft Black Premium Card(180gsm)

Inks:
Carved Pumpkin Distress Oxide Ink
Squeezed Lemonade Distress Oxide Ink
Memento Tuxedo Black Ink
Versafine Onyx Black Ink

Embossing Powder:
Papermania Clear

Embellishments:
Sakura Gelly Roll Medium Point Pen(White)

Tools:
Tonic Studios Guillotine Trimmer
Sizzix Big Shot Machine
3M Scotch R Double Sided Foam Tape
EK Success Powder Tool Applicator
Papermania Heat Tool
Ranger Mini Ink Blending Tool

Craftin Desert Divas!, Friendship Cards, Thank You Cards, Uncategorized

Craftin Desert Divas August Release: Blog Hop!

Hey lovelies!
Yesterday marked the official release of the new Craftin Desert Divas’ August products and day 1 of the blog hop! If you missed any of the fun and inspiration from the DT members yesterday, you can head to the CDD August release blog hop day 1 & product reveal post to catch up! However if you’ve come here from Maaike’s blog post then you’re in the right place, if you’ve got lost you can head over to the Craftin Desert Divas August release blog hop day 2 post to find where you were again!
Today I’m recapping the cards I created and shared during sneak peek week for you! I’m a huge lover of fall, ever since I was a kid I’ve loved watching the leaves change colour and the air gets crisper, which is why I’m so excited about this release! Crisp leaves, fall friends and more makes this release as sweet as it gets. Once you’re finished hopping along, be sure to head over to the Craftin Desert Divas Shop to grab your special discount – 5% off until August 19th! ❤
The first card I shared was using the adorable new Grateful Trolls stamp set and the Hill Scene 2 stencil! For more details on this card you can head to my blog post here.
Grateful Trolls 1 August 2018
For the second card I shared I used the super sweet Dam Shame stamp set! How sweet is this little beaver?! For more details on this card you can head to my blog post here.
Dam Shame 1 August 2018
Thank you for stopping by lovelies! What are your favourite products from the new August release?! I know, it’s such a hard decision! I had so much fun playing with these cute trolls and sweet beavers!
36901571_10160798146590271_7415108762773487616_o

xo
August Release Day 2 Hop List!
Start: Craftin Desert Divas
Jan
Angelica (Guest Designer)
Elaine
Maaike
You are here: Claire-Anne
Next: Courtney
Mari
Candice
Ashlee
Michelle
Sherry
Holly
Charlotte
Rachel
New Release Blog Hop.png

Craftin Desert Divas
Shop
39301800_660512880996060_4892009647549972480_n

♥ Please note that the links to products and the CDD shop are affiliate links. If you choose to make a purchase through these links I will receive a small commission at no extra cost to you. ♥
Craftin Desert Divas!, Friendship Cards, Uncategorized

Craftin Desert Divas August Release – Sneak Peek Day 3!

Hey lovelies!
It’s day 3 of Craftin Desert Divas’ August release sneak peek week! Today there is a whole lotta cuteness being showcased for your inspiration, so be sure to head over to the Craftin Desert Divas blog post to see what the other DT members have created for you!
Today I’m showcasing the Dam Shame set with this sweet little beaver and bug!
1.jpg
I started by cutting a panel from white card stock using the Torn Paper Dies, I blended over the polygon stencil using Broken China and Squeezed Lemonade Distress Oxide ink having them overlap in the middle to create the green shade. I lightly sprayed my panel with my Distress Sprayer bottle to give it a distressed look and dried the excess water droplets with a paper towel. I put down some of the Broken China Distress Oxide ink on a stamping block, mixed with a little water and splattered over the surface too for an extra layer before setting it aside to dry.
2.jpg
I stamped out my cute little beaver and bug using Memento Tuxedo Black ink before moving on to colouring with my Spectrum Noir alcohol markers.
3.jpg
I used TN5, TN3, TN1, GB2 & GB1 for the beaver’s fur. I used a combination of BG5, TN5 & TN3 for his tail and I filled his nose in with IG5. I used TN5 & TN3 for the twigs, along with LG5 & LG3 for the leaves. For his glasses I blended DR2 & CR7 and finished him up with a little GG1 to shade his eyes and just under his top lip before adding my highlights using my white gelly roll pen. I coloured the body of the bug with GB4 & LY1 and the wings with GT1 & IB1 and added a few small highlights along the top of his head and wings.
4.jpg
I cut a panel using white card stock and used the large Torn Paper die to cut a window so I could inlay my ink blended panel. I prepped my panel with my powder tool applicator before stamping my sentiment in Versafine Onyx Black ink, coated it in clear embossing powder and set it with my heat tool. I fussy cut my characters out and popped them up with some foam tape to the left of my sentiment.
5.jpg
I adhered my panel to my card base using some foam tape and added some glow in the dark Nuvo drops in the shade Blue Crush to finish my card, leaving them to set for a full 24 hours in a safe space.
Dam Shame 1 August 2018.jpg
Thank you for stopping by lovelies! This set is just too cute I can’t wait for you to see it all! Remember to head to the August release event on facebook and click “going” if you haven’t already! Myself and the other DT members are sharing our projects in there and the Craftin Desert Divas Gallery all throughout release week!

CDD-ReleaseAugust2018-Facebook-Event-Cover-Photo

xo

Craftin Desert Divas
Shop
CDD Sneak Peek Day 3 Blog Post!

Supplies
Links to new products will be added when they become available!
Dam Shame Stamp Set
Polygon Stencil
Torn Paper Dies
Broken China Distress Oxide Ink
Squeezed Lemonade Distress Oxide Ink
Memento Tuxedo Black Ink
Powder Tool Applicator
Nuvo Glow In The Dark Drops – Blue Crush
White Gelly Roll Medium Point Pen

♥ Please note that the links to products and the CDD shop are affiliate links. If you choose to make a purchase through these links I will receive a small commission at no extra cost to you. ♥
36901571_10160798146590271_7415108762773487616_o

 

 

 

Craftin Desert Divas!, Friendship Cards, Just Because Cards, Thank You Cards, Uncategorized

Craftin Desert Divas August Release – Sneak Peek Day 2!

Hello lovelies!
August release week with Craftin Desert Divas is finally here! I know some of you have been just as excited as I am, so I’m here to showcase a card I made using the brand new adorable set Grateful Trolls and the new Hill Scene 2 stencil! I am madly in love with this set and I know all of you will be too! Make sure you click “going” to the facebook event for this release so you don’t miss out on any of the fun!
1.jpg
I started off by cutting down a panel from white card stock. I blended in clouds using the Hill Scene 2 stencil, Carved Pumpkin and Squeezed Lemonade Distress Oxide ink, changing up which side of the stencil I use each time and sometimes even flipping it over! I lightly sprayed the panel with my Distress Sprayer bottle when I had covered the entire panel and mopped up the excess using a paper towel.
2.jpg
I stamped my cute little troll using Memento Tuxedo Black ink and coloured her using my Spectrum Noir alcohol markers. I added some rosy cheeks with a pink pencil, added three little dots to each cheek using my white gelly roll pen before adding highlights to the rest of my image. Once they had dried I fussy cut my image out and set it aside for a bit.
3.jpg
I cut a strip of white card stock to fit across my panel for my sentiment and to ground my troll later on. I prepped the strip with my powder tool applicator, stamped my sentiment in Versafine Onyx Black ink, coated it in clear embossing powder and set it with my heat tool. I adhered the strip to my panel using double sided tape.
4.jpg
I adhered my troll to my panel using double sided foam tape before backing my entire panel with the same tape and adhering to my card base. I adhered a couple of sequins from the Fall Harvest mix using liquid adhesive to finish this card up and give it a little sparkle!
Grateful Trolls 1 August 2018
Thank you for stopping by lovelies! I can’t wait for you to see the rest of the release and the full sets! They’re too cute to resist! What are your thoughts on what you’ve seen this week so far?! Are you planning your ideas yet? 😉
Remember to stop by the Craftin Desert Divas Blog post to see what amazing peeks and inspiration the other DT members have in store for you! ❤

CDD-ReleaseAugust2018-Facebook-Event-Cover-Photo.png

xo

Craftin Desert Divas
Shop
CDD Sneak Peek Day 2 Blog Post!

Supplies
Links to new products will be added when they become available!
Grateful Trolls Stamp Set
Hill Scene 2 Stencil
Carved Pumpkin Distress Oxide Ink
Squeezed Lemonade Distress Oxide Ink
Memento Tuxedo Black Ink
Versafine Onyx Black Ink
Powder Tool Applicator
White Gelly Roll Medium Point Pen
Fall Harvest Sequins

♥ Please note that the links to products and the CDD shop are affiliate links. If you choose to make a purchase through these links I will receive a small commission at no extra cost to you. ♥
36901571_10160798146590271_7415108762773487616_o

 

 

Craftin Desert Divas!, Friendship Cards, Just Because Cards, Uncategorized

Let’s Get Coloring! Craftin Desert Divas Designer Challenge!

Hey lovelies!
Today I’m taking part in the Craftin Desert Divas Let’s Get Colouring Designer Creative Challenge! Where some of the CDD design team are sharing tips and tricks on how they colour their stamped images, so be sure to head over to the Craftin Desert Divas blog post where each designer is highlighted!

I decided to use alcohol markers to colour my image today, when I first started card making just over a year ago, I found using alcohol markers really intimidating as I had never used them before! I’ve found though that practice really is the key to finding how you like colouring with them! If like me you’re using Spectrum Noir markers, I would definitely suggest making a swatch sheet of the pens you own, it’ll make it easier for you to see which colours would likely go together! Today I’ll be sharing how I find it works best for me with the Spectrum Noir alcohol markers.

1.jpg
I always start by stamping two of the image I want to colour, that way if I make a mistake I have another one ready! Today I’ll be colouring this adorable bunny chasing the butterfly from the brand new Brighter Days set from Craftin Desert Divas.
2.jpg3.jpg4.jpg
My general rule of thumb is to start with my darkest shade, blend it out slightly with my medium shade then finish by blending in my lightest shade. For the bunny’s face/ears/hands I used: IG5, GG2 & GG1.
5.jpg678.jpg
Moving on to the clothes, I stick to the same rule of darkest > lightest but for the yellows and blues I only use two of each shade. For the yellows I used: GB3 & LY1 and for the blues I used: GT2 & IB1. If you don’t have a medium shade and the two colours you have are too far from each other to blend, you can try touching the tip of your dark marker to your light one to create a medium shade!
9.jpg10.jpg
I used TN3 to colour my net, as it’s such a thin area there isn’t need for much shading on it. For the bunny’s little squirrel friend I used: TN5 & TN3 for the darker area of his fur and for the lighter areas I used: TN3 as my darkest and TN1 as my lightest. For the butterfly I blended an orange marker: OR2 and a yellow: LY1 for the main part of the wings, the dot details and the butterfly’s body were coloured using IG5. I coloured the inside of the bunny’s mouth using IG5 too, and then used CR9 and CR4 for their tongues.
11.jpg
I then added some rosy cheeks using a pink coloured pencil, and added dotting details and highlights using a white permanent chalk pen.
12.jpg
I fussy cut my image out and set it aside while I assembled the rest of my card.

I started with my background panel by die cutting a panel using the largest of the Crazy Stitched Frame Dies from heavyweight white card stock. I splattered it with distress ink by laying some ink down on my craft mat and diluting it with water before picking it up with a paint brush, to splatter it I simply held the brush above my panel and tapped on it lightly. I used peacock feathers and mustard seed on their own, then mixed them to create the green splatter. I set that aside to dry while I worked on the “grass” the critters are running on.
I cut another piece of white card stock using the largest of the Crazy Stitched Frame Dies, then cut the stitched border across it using a die from the Shake It Up Dies set. I then took mowed lawn and blended it on my card stock using an ink blending tool before setting it quickly with a heat tool so I could move on to embossing my sentiment. I prepped my grass panel with my powder tool applicator, stamped my sentiment “Sending HUGS” from the Wishful Thoughts stamp set with Versamark ink, coated it with white embossing powder and set it with my heat tool.
I adhered my grass panel to my splattered panel using double sided tape and popped the bunny up with double sided foam tape at the right side of the panel. I created my card base and cut down some yellow spotted patterned paper and adhered it to my base using score tape, before backing my entire panel with double sided foam tape and adhering it to my card base.

CDD DT Coloring Challenge July 18

Thanks for stopping by lovelies! ❤
Remember to head on over to the Craftin Desert Divas Blog to check out what the other Design Team members have created!

xo

Craftin Desert Divas
Shop

Supplies
Brighter Days Stamp Set
Wishful Thoughts Stamp Set
Crazy Stitched Frame Dies
Shake It Up Dies
Powder Tool Applicator
Versamark Ink

♥ Please note that the links to products and the CDD shop are affiliate links. If you choose to make a purchase through these links I will receive a small commission. ♥

36901571_10160798146590271_7415108762773487616_o

 

 

 

 

Friendship Cards, Just Because Cards, Uncategorized, Watercolour Cards

Sprinkled With Love Card Using Some Odd Girl “Sweet & Salty”!

Hey lovelies! ❤ I’m back with another card using the Sweet & Salty stamp set from Some Odd Girl, I personally love this stamp set as the images are such a great size for a focal image! The weather has been heating up more and more lately as summer creeps in, what more perfect time for ice cream?!

~Tools and products used will be listed at the end of this blog post!~

33865948_2120361884658303_7347164441735069696_n.jpg

I created my card base using heavyweight white card stock, and cut a panel of patterned paper from the Pink and Main “Be Brave” 6×6 paper pack to be slightly smaller than my card base. I chose the colourful triangle paper because it reminded me of bunting used for summer parties, how appropriate! I cut some strips from white card stock, I prepped one of the strips with my EK Success Powder tool so the embossing powder would only stick to the area I stamped. I stamped my sentiment “Sprinkled With Love” in Versafine onyx black ink, coated it in Papermania clear embossing powder and set with my heat tool. I then adhered the strips across the patterned paper using double sided foam tape, being careful to line them up with the edges of the patterned paper.

I stamped my ice cream cone images using Ranger Archival jet black ink as I planned to watercolour them this time around. My favourite flavour of ice cream is mint, so I felt I had to put that front and centre! I decided to go with chocolate and vanilla for the other two so they weren’t all competing too much on the card. Once they were dry I fussy cut them out by hand and adhered them together first using my regular tape runner, then adhered them beside my sentiment on my card!

33943289_2120361944658297_1831684469480751104_n.jpg

Thank you for reading lovelies! ❤ This was such a quick card to make, probably one of my quickest! I love how simple yet colourful it is at the same time, and I think it’s perfect to send to a loved one in summer! What’s your favourite flavour of ice cream?!

xo

~Supplies & Links~

**Not all supplies can be listed as they’re from local craft stores, but you can easily find similar things online as they’re pretty common!**

STAMPS:

Some Odd Girl “Sweet & Salty”

CARDSTOCK/PAPER:

Hobbycraft White Premium Smooth Card Stock (300gsm)

Pink and Main Be Brave 6×6 Paper Pack

INKS:

Tsukineko Versafine Onyx Black Ink

Ranger Archival Jet Black Ink

POWDER TOOL:

EK Success Powder Tool

PAPER TRIMMER:

Tonic Studios Guillotine Trimmer

FOAM TAPE:

3M Scotch R Double Sided Foam Tape

EMBOSSING POWDER:

Papermania Clear

HEAT TOOL:

Papermania Multi-Purpose Heat Tool

Friendship Cards, Just Because Cards, Uncategorized

In Omnia Paratus Card Using Ink Road Stamps “Stars Hollow”!

Hey lovelies! ❤

Today I want to share with you the second card I’ve made with this gorgeous stamp set from Ink Road Stamps! Anybody who watches Gilmore Girls will know of the Life and Death Brigade and the latin term ‘In Omnia Paratus’ which means ‘ready for anything’! Some of my favourite moments in the show happened with Rory and the Life and Death Brigade, although I’m still team Jess! With that being said, I couldn’t NOT make this card!

~Tools and products used will be listed at the end of this blog post!~

33377003_2113442525350239_8902136490595713024_n.jpg

I made my tall card base and cut a panel slightly smaller from white card stock, I wanted it to represent the jump made by Rory and Logan with the rest of the group so I felt it was most appropriate! I cut a cloud shape stencil from white card stock again, and began inking my panel from the top with my Ranger/Tim Holtz Salty Ocean Distress Ink. I kept blending the colour all the way down to the bottom of my panel, once finished I distressed it with my Distress Spray bottle.

For the little umbrellas I stamped them with Tsukineko Memento tuxedo black ink on white card stock, then coloured them in rainbow colours using my Spectrum Noir alcohol markers. I took a small circle die and cut them out using my Big Shot machine.

For my sentiments I treated some black card stock with my EK Success powder tool, so the embossing powder wouldn’t stick to anywhere else apart from where I stamped. I stamped both sentiments in Tsukineko Versamark ink, covered them in Altenew pure white embossing powder and set them with my heat tool before cutting them in to thin strips using my paper trimmer. I used my scissors to create a little fish tail banner for the “you jump, I jump” sentiment.

For assembly I began by cutting down some black matte paper to create a border around my panel on the card, adhering it to my card base with my regular tape runner. I then wrapped some blue and white twine around the left side of my panel, adhering it to the back with some washi tape. I backed the umbrella circles and sentiments with double sided foam tape, adhered the umbrellas over the twine and put the sentiments in place where I had planned. I finished by backing the entire panel in foam tape and adhering to my card base.

33306867_2113442595350232_1684195614658658304_n.jpg

Thanks for reading lovelies! ❤ Are any of you here Gilmore Girls fans? I’ve honestly lost count how many times I’ve watched the show from beginning to end, including the newest four episodes released on Netflix! The Ink Road Stamp is now open again! Head on over using the links below to check it out, and see the new products for yourself! ❤

xo

~Supplies & Links~

**Not all supplies can be listed as they’re from local craft stores, but you can easily find similar things online as they’re pretty common!**

STAMPS:

Ink Road Stamps “Stars Hollow”

INK ROAD DISCOUNTS:

50% off your FIRST order at the Ink Road Stamps shop!

Referral code (10% off for existing customers!): claireanne10

CARDSTOCK/PAPER:

Hobbycraft White Premium Smooth Card Stock (300gsm)

INKS:

Tsukineko Versamark “Watermark” Ink

Ranger/Tim Holtz Salty Ocean Distress Ink

Tsukineko Memento Tuxedo Black Ink

POWDER TOOL:

EK Success Powder Tool

FOAM TAPE:

3M Scotch R Double Sided Foam Tape

INK BLENDING:

Ranger/Tim Holtz Ink Blending Tool

DIE CUTTING MACHINE:

Sizzix Big Shot

PAPER TRIMMER:

Tonic Studios Guillotine Trimmer

EMBOSSING POWDER:

Altenew Pure White

SPRAY BOTTLES:

Ranger/Tim Holtz Distress Sprayer

Friendship Cards, Just Because Cards, Uncategorized, Watercolour Cards

Sarcastic Coffee Card Using Ink Road Stamps “Stars Hollow”

Hey lovelies! ❤

By now I probably don’t need to explain my love for coffee, or Gilmore Girls for that matter! I made this card yesterday after learning about the Coffee Lover’s blog hop that started on Friday! So of course, being a Lorelai Gilmore on the coffee addiction scale I just HAD to use the Stars Hollow Set from Ink Road Stamps again!

~Tools and products used will be listed at the end of this blog post!~

33540697_2115506188477206_3129293552454991872_n.jpg

I began by treating a piece of white card stock with my EK success powder tool as I knew I was going to emboss my images for this card. I stamped the to go coffee cups in a random fashion in Tsukineko Versafine onyx black ink, coated in clear embossing powder and set them with my heat tool. I used a circle die to cut out the area I wanted with my Sizzix Big Shot machine. I’d never tried watercolouring on my white card stock before, but I didn’t want the texture which my watercolour paper has for this piece. I found that as long as I don’t use too much water, it holds up just fine! I took my Salty Ocean distress ink, spread some on my glass craft mat and sprayed with some water, picking up the colour with a paintbrush I painted the areas around the coffee cups with the ink. I moved on to using some brown, orange and green watercolour paints for the coffee cups themselves and set the circle aside to dry.

I created my card base and cut some matte black paper slightly smaller then adhered it with my regular tape runner. I created a panel with some foiled card stock from DCWV. I prepped some black card stock with my powder tool and chose my sentiments, I chose “coffee please, people are particularly stupid today, I cannot talk to any more of them”, I love a good sassy sentiment! This is an iconic Michelle moment in Gilmore Girls and I can’t read that phrase without reading it in his voice! I stamped my sentiments in Tsukineko Versamark ink and heat embossed it in Altenew Pure White embossing powder, cutting them in to thin strips.

By this time the circle panel was dry, so I took a die from the Avery Elle tag dies and partially die cut it on either side of the circle. I backed the circle with double sided foam tape as I wanted it to add a little extra dimension to the card. I used some blue and white twine and threaded it through the holes on either side of the circle. Adhering the circle to the foiled card stock panel, I wrapped the twine behind the foiled panel and adhered it to the back with some washi tape. I glued my sentiments flat to the card using my regular tape runner, backed the entire panel in foam tape and adhered to my card base.

33520976_2115506261810532_4573125338187431936_n.jpg

Thanks for reading lovelies! ❤ I know this is not one of my regular posting days, but I really wanted to take part in the hop! Definitely go and check out some of the other posts people are creating, they’re making some really incredible things! 🙂 The Ink Road Stamps shop is still closed preparing for that big product reveal I keep talking about, if you’ve signed up for the e-mail notifications already you should have a sneak peak in your inbox by now! If you haven’t, what are you waiting for?! Go to the site and sign up to be notified when the shop reopens!

xo

29541159_10216244462694822_8004581139974979584_n

~Supplies & Links~

**Not all supplies can be listed as they’re from local craft stores, but you can easily find similar things online as they’re pretty common!**

INK ROAD STAMPS:

Sign up to be notified when the shop reopens!

CARDSTOCK/PAPER:

Hobbycraft White Premium Smooth Card Stock (300gsm)

INKS:

Tsukineko Versamark “Watermark” Ink

Ranger/Tim Holtz Salty Ocean Distress Ink

Tsukineko Versafine Onyx Black Ink

EMBOSSING POWDER:

Papermania Clear

Altenew Pure White

POWDER TOOL:

EK Success Powder Tool

FOAM TAPE:

3M Scotch R Double Sided Foam Tape

DIE CUTTING MACHINE:

Sizzix Big Shot

PAPER TRIMMER:

Tonic Studios Guillotine Trimmer

HEAT TOOL:

Papermania Multi-Purpose Heat Tool

Friendship Cards, Just Because Cards, Uncategorized

Coffee Friendship Card Using Ink Road Stamps “Stars Hollow”!

Hello lovelies! ❤

Yup you read that right, I’m back with yet ANOTHER coffee card! When will I bore of making caffeine related cards? Never! Especially when it ties in to my all time favourite show, Gilmore Girls!

~Tools and products used will be listed at the end of this blog post!~

33340909_2112849122076246_4776675868548268032_n.jpg

I created my card base from white card stock, followed by cutting some grey card stock to fit the base leaving a slight white border at either side. I used an embossing folder I got free in a magazine to create the textured pattern on the grey card, but before running it through I covered the inside of the embossing folder with Versamark ink (on the smoother panel with no ridges) so the embossed areas would be lighter than the areas without embossing. I feel like this creates a subtle contrast but it definitely adds something extra!

I cut a white strip to fit across the width of the grey panel and used my EK Success powder tool to treat the card so my embossing powder would only stick to the areas I stamped. I took the small solid coffee cup stamp from the Stars Hollow set and stamped with Versamark ink, coated it in Papermania Gold embossing powder and set it with my heat tool. I repeated this all along the white strip.

For the sentiment I treated some white card stock again with my powder tool, stamped my sentiment “Coffee please, in a VAT” (because who doesn’t need that right?!) in Versafine Onyx Black ink, covered with Papermania clear embossing powder and set it with my heat tool. I took a small circle die and cut it out using my Big Shot machine.

Here is where I began the assembly of my card, I backed the grey panel with foam tape and adhered it to my card base. I used my regular tape runner to adhere the strip with the coffee cups to the grey panel, and foam tape once again to pop up the circular sentiment in the centre of the strip. I chose some copper and gold sequins and adhered them to my card using Ranger Multi Medium Matte adhesive for a little extra shine!

33207370_2112849212076237_794424879377022976_n

Thank you for reading lovelies! ❤ I am absolutely IN LOVE with this stamp set from Ink Road Stamps, right now the shop is closed in preparation for a BIG product reveal, but I will edit the link to the stamp set when it is back up and running as well as my referral code for 50% off your first order! If you’re already a customer of Ink Road Stamps you can always use my code “claireanne10” for 10% off your order! For now though, head on over to the website and sign up to be notified when the shop reopens, keep your eyes open for that product reveal! Exciting stuff!

xo

~Supplies & Links~

**Not all supplies can be listed as they’re from local craft stores, but you can easily find similar things online as they’re pretty common!**

INK ROAD STAMPS:

Sign up to be notified when the shop opens here!

CARDSTOCK/PAPER:

Hobbycraft White Premium Smooth Card Stock (300gsm)

INKS:

Tsukineko Versamark “Watermark” Ink

Tsukineko Versafine Onyx Black Ink

EMBOSSING POWDER:

Papermania Gold

Papermania Clear

POWDER TOOL:

EK Success Powder Tool

PAPER TRIMMER:

Tonic Studios Guillotine Trimmer

FOAM TAPE:

3M Scotch R Double Sided Foam Tape

HEAT TOOL:

Papermania Multi-Purpose Heat Tool

DIE CUTTING MACHINE:

Sizzix Big Shot