Halloween Cards, Uncategorized

Halloween Card Using Leftover Supplies from Love From Lizi 2017 Card Kit!

Hey lovelies!
My crafty friends who know me, know I LOVE to hoard Halloween supplies. Some things are just too pretty to use! I’ve made it my mission this year to use all the things that I’ve been hoarding for quite some time now, some of those supplies come from the Love From Lizi Halloween card kit from last year! I couldn’t bring myself to use most of the pretty papers and bits and bobs last year, so here is the first of the cards I’ve made with what I have left over!
1.jpg
I cut down two white panels one for my base and the other to ink smoosh and stamp. I ink smooshed my smaller panel with Twisted Citron and a little bit of Evergreen Bough Distress Oxide ink, drying between layers. Once it was completely dry I splattered some of the Evergreen Bough ink on to my ink smooshed panel and my white panel with a paint brush, I also splattered some black watercolour paint on my white panel. I stamped my skulls from the Love from Lizi “Punny Bones” set in a pattern using Versafine Onyx Black ink. I ran it through my die cutting machine with the largest of my Inside Scalloped Octagon dies from Craftin Desert Divas and removed the inside piece to use on my card. I ran the same die through once more using black card stock to create my frame.
2
I cut a piece of the green and black patterned paper in to a large ribbon to go down the left side of my card and adhered everything in to place using double sided score tape.
3.jpg
I trimmed the top off of the Octagon using my paper trimmer. I prepped a thin strip of black card stock with my EK Success powder tool and stamped my sentiment from Newton’s Nook’s “Boo-tiful Night” stamp set in Versamark ink, coated it in white embossing powder and set with my heat tool. I used my scissors to create a fish tail at the end of my sentiment banner and popped it up on my panel using double sided foam tape. I cut a panel from the patterned paper slightly larger than my base panel of my card and adhered both to my card base using double sided score tape. I finished up by framing my sentiment with some Ebony Black Nuvo drops.
41323161_463128994197779_587316574201839616_n.jpg
Thanks for reading lovelies! Do you hoard certain craft supplies too? I feel like I need to use some up now and again so my craft room isn’t bursting at the seams!

xo

Supplies:

Stamps & Dies:
Love From Lizi “Punny Bones” Stamp Set
Newton’s Nook “Boo-tiful Night” Stamp Set
Craftin Desert Divas Inside Scalloped Octagon Dies

Cards & Papers:
Hobbycraft White Premium Smooth Card(300gsm)
Hobbycraft Black Premium Card(180gsm)

Inks:
Twisted Citron Distress Oxide Ink
Evergreen Bough Distress Oxide Ink
Versafine Onyx Black Ink
Versamark Watermark Ink

Embossing Powder:
Altenew Pure White

Embellishments:
Ebony Black Nuvo Crystal Drops

Tools:
Tonic Studios Guillotine Trimmer
Sizzix Big Shot Machine
3M Scotch R Double Sided Foam Tape
EK Success Powder Tool Applicator
Papermania Heat Tool

Advertisements
Friendship Cards, Halloween Cards, Uncategorized

Witch Way To The Candy? Cute Halloween Card Using Newton’s Nook “Boo-tiful Night” Set! (Inky Paws Challenge #80)

Hey lovelies!
Today I’m sharing this cute Halloween card I made for Newton’s Nook “Inky Paws” challenge! You can check out more about the challenge here! For this challenge you have to follow a card sketch, which is something I’ve never done before! Of course I had to make the theme of my card Halloween – we all know I’m on a Halloween kick lately and I doubt I’ll stop making Halloween cards until November at this rate!
1.jpg
To start I stamped this cute little witch cat using Memento Tuxedo Black ink and coloured him in using my Spectrum Noir alcohol markers. I added rosy cheeks with a pink coloured pencil and highlights with my white gelly roll pen.
Spectrum Noir colours used:
Cat: (Fur) IG5, GG2, GG1 (Nose) CR2 (Ears) CR2, FS8
Broom: TN5, TN3, GB6, GB1, CR7, OR3, OR2
Hat: BG5, BG3, CR7, OR3, OR2
2
Once I had fussy cut out my image, I cut down a panel from heavy white card stock. I made a smaller panel the same width and cut across it diagonally, I blended Carved Pumpkin Distress Oxide ink on to my diagonal strip, sprayed it with my distress sprayer and dried any excess water with a paper towel. I dried the ink with my heat tool before stamping the small bat from the stamp set in a pattern using Versafine Onyx Black ink. I took another piece of white card stock and ran it through my die cutting machine with the medium Inside Scalloped Circle die from Craftin Desert Divas. I took the inner piece of the die cut and blended Squeezed Lemonade Distress Oxide ink all over, I also blended the smallest amount of Carved Pumpkin Distress Oxide ink over the edges for a little more dimension.
3.jpg4.jpg
I took my white panel and splattered it with Carved Pumpkin Distress Oxide ink and black watercolour paint. Once that was dry I prepped my panel with my EK Success Powder Tool Applicator. I stamped my sentiment using Versafine Onyx Black ink, coated it in clear embossing powder and set it with my heat tool.
5.jpg6
I adhered my diagonal strip with the bats and my black ribbon to my panel using double sided score tape. I took a long piece of black and white twine and cut it in to two pieces, adhering one end of each to the back of my panel (the shorter side to the right), I brought them both together over the front of my diagonal strip and tied them in a little bow. To finish my panel I popped the circle and cat up on some foam tape to add dimension to my card! I framed my panel using some black paper and adhered it to my card base.
41008071_309490073188431_3160495961579454464_n.jpg
Thanks for reading lovelies! I really love how this card turned out, it’s possibly my favourite Halloween card I’ve made so far this year! (I have a few more posts coming soon!) The images in this stamp set are some of my favourite Halloween stamps I own, and I’m for sure getting a lot of use out of them this year!

xo

Newton’s Nook Inky Paws:
Inky Paws Challenge #80 Blog Post

Supplies:

Stamps & Dies:
Newton’s Nook “Boo-tiful Night” Stamp Set
Craftin Desert Divas Inside Scalloped Circle Dies

Cards & Papers:
Hobbycraft White Premium Smooth Card(300gsm)
Hobbycraft Black Premium Card(180gsm)

Inks:
Carved Pumpkin Distress Oxide Ink
Squeezed Lemonade Distress Oxide Ink
Memento Tuxedo Black Ink
Versafine Onyx Black Ink

Embossing Powder:
Papermania Clear

Embellishments:
Sakura Gelly Roll Medium Point Pen(White)

Tools:
Tonic Studios Guillotine Trimmer
Sizzix Big Shot Machine
3M Scotch R Double Sided Foam Tape
EK Success Powder Tool Applicator
Papermania Heat Tool
Ranger Mini Ink Blending Tool

Friendship Cards, Halloween Cards, Uncategorized

Simple Halloween Card Using Lawn Fawn “Trick or Treat” set!

Hey lovelies!
I’ve been digging through my craft supplies and pulling out everything fall/Halloween related! If you know me, you know I love a good small stamp that I can make quick and easy backgrounds with! These candy corn from Lawn Fawn are no exception to that – look at their cute little faces! I couldn’t resist making a simple card using them!
1
I trimmed down a panel from white card stock and stamped my candy corn in a random pattern all over using Memento Tuxedo Black ink. I usually do these backgrounds with watercolour but I love how vivid my Spectrum Noir pens make the candy corn in this case!
23.jpg
When colouring I usually work from darkest to lightest:
Orange section: CR7 -> OR3 -> OR2
Yellow section: GB4 -> GB3 -> LY1
4.jpg
I added shadows using my GG1 Spectrum Noir marker, and highlights with my white gelly roll pen. I love adding these little details as I feel like it makes them stand out more!
5.jpg
I used the smallest of my Inside Scalloped Circle dies and cut it from white card stock, removing the middle piece that I would be using for my sentiment. I blended Squeezed Lemonade Distress Oxide ink on to my sentiment piece, before blending some Carved Pumpkin Distress Oxide ink around the edges for some dimension. I dried the ink with my heat tool and prepped with my EK Success powder tool applicator. I stamped my sentiment from Newton’s Nook’s “Boo-tiful Night” set using Versafine Onyx Black ink, coated it in clear embossing powder and set it with my heat tool. I picked out some orange ribbon and backed it with double sided score tape, I adhered that directly to my panel and popped my sentiment up with some foam tape. I backed my panel with double sided score tape and adhered to my card base!
40684855_473130436520396_6874617270652370944_n
Thank you for reading lovelies! ❤
This style of card is one of my favourites to make, especially if you don’t have a lot of time to craft! Quick and simple yet still adorable!

xo

Supplies:

Stamps, Dies & Stencils:
Lawn Fawn Trick or Treat Stamp Set
Newton’s Nook Boo-tiful Night Stamp Set
Craftin Desert Divas Inside Scalloped Circle Dies

Cards & Papers:
Hobbycraft White Premium Smooth Card Stock(300gsm)

Inks:
Memento Tuxedo Black Ink
Versafine Onyx Black Ink
Carved Pumpkin Distress Oxide Ink
Squeezed Lemonade Distress Oxide Ink

Embossing Powder:
Papermania Clear

Embellishments:
Sakura Gelly Roll Medium Point Pen(White)

Tools:
Tonic Studios Guillotine Trimmer
Sizzix Big Shot Machine
3M Scotch R Double Sided Foam Tape
EK Success Powder Tool Applicator
Papermania Heat Tool
Ranger Mini Ink Blending Tool

Friendship Cards, Halloween Cards, Uncategorized

Cute ‘You’re the pick of the patch’ Halloween Card Using Newton’s Nook “Boo-tiful Night” set!

Hey lovelies!
I’m well in the spooky spirit and back with another Halloween card using Newton’s Nook “Boo-tiful Night” set! These kitties are just too cute I can’t get enough of them! Halloween stamps are my weakness, especially when they have pumpkins!
40407557_228980391128188_7015983993191399424_n
I coloured these images using my Spectrum Noir alcohol markers, added rosy cheeks on the grey cats using a pink coloured pencil and finished up by adding some highlights using my white gelly roll pen. I fussy cut the images out by hand and moved on to my panel.
40566535_1176043342537479_8450729724069543936_n.jpg40400218_184070099062553_4227284272181936128_n
I cut some black card stock down to size using my guillotine trimmer. I used the Flying Bats stencil from Newton’s Nook to blend Carved Pumpkin Distress Oxide ink on to my panel, when I removed the stencil I sprinkled some clear embossing powder over the bats and set with my heat tool to give it a textured look and feel. I cut my window from my panel using Craftin Desert Divas Inside Scalloped Circle dies and removed the scalloped part so I was left with the stitched circle.
40400275_237081580308551_7666754826541203456_n40464201_1209811749159419_2182684886425403392_n.jpg
I cut my grass using the Outdoor Landscape dies from Craftin Desert Divas and ink blended it with Mowed Lawn Distress Ink, and I used the Hill Scene 2 Stencil to blend some Twisted Citron Distress Oxide ink on to my background panel to create my clouds. I distressed the background panel with my Distress sprayer, splattered it with more Twisted Citron ink using a paintbrush and dried it before prepping it with my powder tool applicator. I stamped my sentiment and the bat using Versafine Onyx Black ink, coated it in clear embossing powder and set it with my heat tool. I adhered everything in to place and finished my panel using some orange ribbon, as well as some black and white twine. I blended some Carved Pumpkin Distress Oxide ink over the edges of some white card stock slightly larger than my panel to frame my panel and adhered everything to my card base using score tape and double sided foam tape.
40400883_217772082424999_9114245997424279552_n
Thanks for reading lovelies! ❤
Are you all getting excited for Halloween yet? It seems people in the UK are more prepared for Christmas right now and I’m not ready to even think about that! What are your plans for Halloween this year? I’d love to know how you celebrate!

xo

Supplies:

Stamps, Dies & Stencils:
Newton’s Nook Boo-tiful Night Stamp Set
Newton’s Nook Flying Bats Stencil
Craftin Desert Divas Outdoor Landscape Dies
Craftin Desert Divas Hill Scene 2 Stencil
Craftin Desert Divas Inside Scalloped Circle Dies

Cards & Papers:
Hobbycraft White Premium Smooth Card Stock(300gsm)
Hobbycraft Black Premium Card Stock(180gsm)

Inks:
Carved Pumpkin Distress Oxide Ink
Mowed Lawn Distress Ink
Memento Tuxedo Black Ink
Versafine Onyx Black Ink

Embossing Powder:
Papermania Clear

Embellishments:
Sakura Gelly Roll Medium Point Pen(White)

Tools:
Tonic Studios Guillotine Trimmer
Sizzix Big Shot Machine
3M Scotch R Double Sided Foam Tape
EK Success Powder Tool Applicator
Papermania Heat Tool

Friendship Cards, Halloween Cards, Uncategorized

Hey there Pumpkin! Cute Halloween Card using Newton’s Nook “Boo-tiful Night” set!

Hey lovelies!
Halloween is fast approaching and it’s my absolute favourite! I’ve already been stamping out everything Halloween in my stash ready to colour for more cards! I had to break open this Newton’s Nook Boo-tiful Night set first though, the adorable cats and pumpkins were calling to me!
40487965_729713747368455_4835227697405755392_n.jpg40421306_516119335503500_4227047250116739072_n.jpg
When I get a new stamp set I like to stamp all of the images out using Memento Tuxedo Black ink to colour up ready for when I need them. I’m planning to make and send out a lot of Halloween cards this year so I know every one of these adorable images will go to use! I used my Spectrum Noir alcohol markers to colour these cute kitties, a pink coloured pencil to add their rosy cheeks and my white gelly roll pen to add highlights. I fussy cut them all out before moving on to my background.
40513323_309805693117735_5816478495903055872_n.jpg
I used the Newton’s Nook “Flying Bats” stencil and Carved Pumpkin Distress Oxide ink to blend the bats on to some white card stock, after removing the stencil I blended the ink darker over the edges of my panel and gently blended it in to the middle for the lighter area. I splattered some black watercolour paint on my panel and allowed it to dry, I just love how black and orange look together so I couldn’t resist!
40519023_332012790907778_3260364555485708288_n
I cut my grass using Craftin Desert Divas’ “Outdoor Landscape” dies, I blended some Mowed Lawn Distress ink along with some Fossilized Amber near the top to give the effect that the top of the grass is glowing from the orange light. I prepped the grass with my powder tool applicator, stamped my sentiment using Versamark ink, coated it in Altenew “Pure White” embossing powder and set with my heat tool. I adhered my grass panel to my background and popped the adorable little cat and pumpkins up with some foam tape. I created a card base from heavyweight white card stock, cut down some black paper to frame my panel and adhered everything to the card base. I finished up by adding some Ebony Black Nuvo drops to draw attention to my sentiment then set my card to dry in a safe place for 24 hours.
40261786_329151554505563_5250034376133050368_n
Thank you for reading lovelies!<3
This is my first Halloween card of the year and I’m so excited to make more! You can expect to see many more over the next month!

xo

Supplies:

Stamps, Dies & Stencils:
Newton’s Nook Boo-tiful Night Stamp Set
Newton’s Nook Flying Bats Stencil
Craftin Desert Divas Outdoor Landscape Dies

Card Stock:
Hobbycraft White Premium Smooth Card Stock (300gsm)
Hobbycraft Black Premium Card Stock (180gsm)

Inks:
Carved Pumpkin Distress Oxide Ink
Mowed Lawn Distress Ink
Fossilized Amber Distress Ink
Memento Tuxedo Black Ink
Versamark Ink

Embossing Powder:
Altenew Pure White Crisp

Embellishments:
Sakura Gelly Roll Medium Point Pen (White)
Ebony Black Nuvo Drops

Tools:
Tonic Studios Guillotine Trimmer
Sizzix Big Shot Machine
3M Scotch R Double Sided Foam Tape
EK Success Powder Tool Applicator
Papermania Heat Tool

Friendship Cards, Just Because Cards, Uncategorized, Watercolour Cards

Friendship Card using Simon Says Stamp “If The Hat Fits”!

Hello lovelies! ❤

Happy May! This year is going by so quickly isn’t it?! To me it still feels like Christmas and New Year was last week!

Today I’m sharing a card I made for my best friend using the Simon Says Stamp – If The Hat Fits stamp set, who said witch hats were only for Halloween? I think we all have that little bit of magic in us all year round!

~Tools and products used will be listed at the end of this blog post!~

31129383_2078024325558726_347695070243192832_n

After creating my card base and topping it with some matte black paper, I cut down a piece of watercolour paper to the size I needed and adhered it to the base of my stamping platform using washi tape and the magnets provided down the right side of the panel. I knew I wanted to do a lot of stamping down the left side of the card, so this gave me all the room I needed! I stamped three of the hats on some Simon Says Stamp masking paper and cut them out, I wanted to stack the hats on top of each other so in order to avoid all the lines crossing messily this is a necessary step. In order for the hats to look stacked, I started stamping from the top of the pile using Ranger Archival Jet Black ink, masking with the appropriate mask each time and worked my way down until I was close to the bottom of the panel.

Now my image is ready to paint! I tried to stick to a Witch-ish colour palette as it suits my friend and I’s aesthetic, though you can use any colours you’d like to with these hats! I painted the actual hats themselves first, leaving some drying time before moving on to the ribbons/trims as to avoid any overflow and mudding of paints. I used my Gansai Tambi “Starry Colors” paints for the buckles. Once my panel was dry I removed it from my stamping platform and placed it on my glass craft mat to splatter with black paint for that extra grungy/distressed feel!

Leaving the splattering to dry naturally I moved on to my sentiment, after using my powder tool, I heat embossed “You say witch like it’s a bad thing” with white embossing powder on black card stock, then die cut it with a small circle die from my stash. For the inside sentiment I went with “If the hat fits, get the matching shoes and broom” in Ranger Archival Jet Black ink once again, knowing my friend will see the comical side.

To finish off the card I adhered a black ribbon down the right side of the panel, attached my die cut sentiment circle with foam tape towards the bottom of the panel then using my regular tape runner I adhered the panel to the card base!

31093294_2078024372225388_5202122156225331200_n

Thank you for reading lovelies! ❤ This card took a little while longer to make due to all the masking, but I definitely feel like it was worth it! This is possibly one of my favourite cards I’ve made to date!

xo

~Supplies & Links~

**Not all supplies can be listed as they’re from local craft stores, but you can easily find similar things online as they’re pretty common!**

STAMPS:

Simon Says Stamp “If The Hat Fits”

CARD/PAPER:

Hobbycraft White Premium Smooth Card Stock (300gsm)

EMBOSSING POWDER:

Altenew Pure White

POWDER TOOL:

EK Success Powder Tool

FOAM TAPE:

3M Scotch R Double Sided Foam Tape

PAPER TRIMMER:

Tonic Studios Guillotine Trimmer

STAMPING PLATFORM:

Tonic Studios/Tim Holtz Stamping Platform

WATERCOLOUR PAINT:

Gansai Tambi “Starry Colors”

INK:

Ranger Archival Jet Black Ink

Tsukineko Versamark Watermark Ink

MASKING:

Simon Says Stamp Masking Paper