Halloween Cards, Uncategorized

Halloween Card Using Leftover Supplies from Love From Lizi 2017 Card Kit!

Hey lovelies!
My crafty friends who know me, know I LOVE to hoard Halloween supplies. Some things are just too pretty to use! I’ve made it my mission this year to use all the things that I’ve been hoarding for quite some time now, some of those supplies come from the Love From Lizi Halloween card kit from last year! I couldn’t bring myself to use most of the pretty papers and bits and bobs last year, so here is the first of the cards I’ve made with what I have left over!
1.jpg
I cut down two white panels one for my base and the other to ink smoosh and stamp. I ink smooshed my smaller panel with Twisted Citron and a little bit of Evergreen Bough Distress Oxide ink, drying between layers. Once it was completely dry I splattered some of the Evergreen Bough ink on to my ink smooshed panel and my white panel with a paint brush, I also splattered some black watercolour paint on my white panel. I stamped my skulls from the Love from Lizi “Punny Bones” set in a pattern using Versafine Onyx Black ink. I ran it through my die cutting machine with the largest of my Inside Scalloped Octagon dies from Craftin Desert Divas and removed the inside piece to use on my card. I ran the same die through once more using black card stock to create my frame.
2
I cut a piece of the green and black patterned paper in to a large ribbon to go down the left side of my card and adhered everything in to place using double sided score tape.
3.jpg
I trimmed the top off of the Octagon using my paper trimmer. I prepped a thin strip of black card stock with my EK Success powder tool and stamped my sentiment from Newton’s Nook’s “Boo-tiful Night” stamp set in Versamark ink, coated it in white embossing powder and set with my heat tool. I used my scissors to create a fish tail at the end of my sentiment banner and popped it up on my panel using double sided foam tape. I cut a panel from the patterned paper slightly larger than my base panel of my card and adhered both to my card base using double sided score tape. I finished up by framing my sentiment with some Ebony Black Nuvo drops.
41323161_463128994197779_587316574201839616_n.jpg
Thanks for reading lovelies! Do you hoard certain craft supplies too? I feel like I need to use some up now and again so my craft room isn’t bursting at the seams!

xo

Supplies:

Stamps & Dies:
Love From Lizi “Punny Bones” Stamp Set
Newton’s Nook “Boo-tiful Night” Stamp Set
Craftin Desert Divas Inside Scalloped Octagon Dies

Cards & Papers:
Hobbycraft White Premium Smooth Card(300gsm)
Hobbycraft Black Premium Card(180gsm)

Inks:
Twisted Citron Distress Oxide Ink
Evergreen Bough Distress Oxide Ink
Versafine Onyx Black Ink
Versamark Watermark Ink

Embossing Powder:
Altenew Pure White

Embellishments:
Ebony Black Nuvo Crystal Drops

Tools:
Tonic Studios Guillotine Trimmer
Sizzix Big Shot Machine
3M Scotch R Double Sided Foam Tape
EK Success Powder Tool Applicator
Papermania Heat Tool

Advertisements
Friendship Cards, Halloween Cards, Uncategorized

Witch Way To The Candy? Cute Halloween Card Using Newton’s Nook “Boo-tiful Night” Set! (Inky Paws Challenge #80)

Hey lovelies!
Today I’m sharing this cute Halloween card I made for Newton’s Nook “Inky Paws” challenge! You can check out more about the challenge here! For this challenge you have to follow a card sketch, which is something I’ve never done before! Of course I had to make the theme of my card Halloween – we all know I’m on a Halloween kick lately and I doubt I’ll stop making Halloween cards until November at this rate!
1.jpg
To start I stamped this cute little witch cat using Memento Tuxedo Black ink and coloured him in using my Spectrum Noir alcohol markers. I added rosy cheeks with a pink coloured pencil and highlights with my white gelly roll pen.
Spectrum Noir colours used:
Cat: (Fur) IG5, GG2, GG1 (Nose) CR2 (Ears) CR2, FS8
Broom: TN5, TN3, GB6, GB1, CR7, OR3, OR2
Hat: BG5, BG3, CR7, OR3, OR2
2
Once I had fussy cut out my image, I cut down a panel from heavy white card stock. I made a smaller panel the same width and cut across it diagonally, I blended Carved Pumpkin Distress Oxide ink on to my diagonal strip, sprayed it with my distress sprayer and dried any excess water with a paper towel. I dried the ink with my heat tool before stamping the small bat from the stamp set in a pattern using Versafine Onyx Black ink. I took another piece of white card stock and ran it through my die cutting machine with the medium Inside Scalloped Circle die from Craftin Desert Divas. I took the inner piece of the die cut and blended Squeezed Lemonade Distress Oxide ink all over, I also blended the smallest amount of Carved Pumpkin Distress Oxide ink over the edges for a little more dimension.
3.jpg4.jpg
I took my white panel and splattered it with Carved Pumpkin Distress Oxide ink and black watercolour paint. Once that was dry I prepped my panel with my EK Success Powder Tool Applicator. I stamped my sentiment using Versafine Onyx Black ink, coated it in clear embossing powder and set it with my heat tool.
5.jpg6
I adhered my diagonal strip with the bats and my black ribbon to my panel using double sided score tape. I took a long piece of black and white twine and cut it in to two pieces, adhering one end of each to the back of my panel (the shorter side to the right), I brought them both together over the front of my diagonal strip and tied them in a little bow. To finish my panel I popped the circle and cat up on some foam tape to add dimension to my card! I framed my panel using some black paper and adhered it to my card base.
41008071_309490073188431_3160495961579454464_n.jpg
Thanks for reading lovelies! I really love how this card turned out, it’s possibly my favourite Halloween card I’ve made so far this year! (I have a few more posts coming soon!) The images in this stamp set are some of my favourite Halloween stamps I own, and I’m for sure getting a lot of use out of them this year!

xo

Newton’s Nook Inky Paws:
Inky Paws Challenge #80 Blog Post

Supplies:

Stamps & Dies:
Newton’s Nook “Boo-tiful Night” Stamp Set
Craftin Desert Divas Inside Scalloped Circle Dies

Cards & Papers:
Hobbycraft White Premium Smooth Card(300gsm)
Hobbycraft Black Premium Card(180gsm)

Inks:
Carved Pumpkin Distress Oxide Ink
Squeezed Lemonade Distress Oxide Ink
Memento Tuxedo Black Ink
Versafine Onyx Black Ink

Embossing Powder:
Papermania Clear

Embellishments:
Sakura Gelly Roll Medium Point Pen(White)

Tools:
Tonic Studios Guillotine Trimmer
Sizzix Big Shot Machine
3M Scotch R Double Sided Foam Tape
EK Success Powder Tool Applicator
Papermania Heat Tool
Ranger Mini Ink Blending Tool

Friendship Cards, Halloween Cards, Uncategorized

Simple Halloween Card Using Lawn Fawn “Trick or Treat” set!

Hey lovelies!
I’ve been digging through my craft supplies and pulling out everything fall/Halloween related! If you know me, you know I love a good small stamp that I can make quick and easy backgrounds with! These candy corn from Lawn Fawn are no exception to that – look at their cute little faces! I couldn’t resist making a simple card using them!
1
I trimmed down a panel from white card stock and stamped my candy corn in a random pattern all over using Memento Tuxedo Black ink. I usually do these backgrounds with watercolour but I love how vivid my Spectrum Noir pens make the candy corn in this case!
23.jpg
When colouring I usually work from darkest to lightest:
Orange section: CR7 -> OR3 -> OR2
Yellow section: GB4 -> GB3 -> LY1
4.jpg
I added shadows using my GG1 Spectrum Noir marker, and highlights with my white gelly roll pen. I love adding these little details as I feel like it makes them stand out more!
5.jpg
I used the smallest of my Inside Scalloped Circle dies and cut it from white card stock, removing the middle piece that I would be using for my sentiment. I blended Squeezed Lemonade Distress Oxide ink on to my sentiment piece, before blending some Carved Pumpkin Distress Oxide ink around the edges for some dimension. I dried the ink with my heat tool and prepped with my EK Success powder tool applicator. I stamped my sentiment from Newton’s Nook’s “Boo-tiful Night” set using Versafine Onyx Black ink, coated it in clear embossing powder and set it with my heat tool. I picked out some orange ribbon and backed it with double sided score tape, I adhered that directly to my panel and popped my sentiment up with some foam tape. I backed my panel with double sided score tape and adhered to my card base!
40684855_473130436520396_6874617270652370944_n
Thank you for reading lovelies! ❤
This style of card is one of my favourites to make, especially if you don’t have a lot of time to craft! Quick and simple yet still adorable!

xo

Supplies:

Stamps, Dies & Stencils:
Lawn Fawn Trick or Treat Stamp Set
Newton’s Nook Boo-tiful Night Stamp Set
Craftin Desert Divas Inside Scalloped Circle Dies

Cards & Papers:
Hobbycraft White Premium Smooth Card Stock(300gsm)

Inks:
Memento Tuxedo Black Ink
Versafine Onyx Black Ink
Carved Pumpkin Distress Oxide Ink
Squeezed Lemonade Distress Oxide Ink

Embossing Powder:
Papermania Clear

Embellishments:
Sakura Gelly Roll Medium Point Pen(White)

Tools:
Tonic Studios Guillotine Trimmer
Sizzix Big Shot Machine
3M Scotch R Double Sided Foam Tape
EK Success Powder Tool Applicator
Papermania Heat Tool
Ranger Mini Ink Blending Tool