Bumbleberry Papercrafts, Just Because Cards, Uncategorized

Autumnal Themed Card Using Lawn Fawn’s “Outside-In Stitched Pumpkin” Dies!

Hello lovelies!
I’m back after a short break last week with an autumnal card using the Outside-In Stitched Pumpkin dies from Lawn Fawn!
125
I cut my pieces from white card stock except for the face, which I cut from black card stock. I decided not to use the face as my card went in a different direction. I used Carved Pumpkin and Vintage Photo Distress Oxide Inks to colour my pumpkin and the stem, and coloured the tendril with green alcohol markers. I adhered my stem and tendril to the back of my pumpkin with Scor-Tape. I used my Misti stamping tool to stamp my sentiment from Lawn Fawn’s “Spooky Village” stamp set on white card stock, using Gina K’s Amalgam Jet Black ink. I trimmed my sentiment strip down to size, cut the ends to create a banner shape and adhered it across my pumpkin using 3M Scotch Double Sided Foam Tape.
34
I was particularly fond of these leaves once I had created them and could definitely see myself making more like these for future autumnal cards! I used Fired Brick, Fossilized Amber and a little tiny bit of Vintage Photo Distress Oxide Inks and laid them down on my glass crafting mat. I sprayed them with a little bit of water and placed my white card stock down on it repeatedly, drying between layers until I was happy with the outcome. I splattered it with some metallic gold watercolour paint to give it some more texture and shimmer before using the leaf die to cut as many as I could from the panel.
67
I used the largest of Mama Elephant’s “Basic Rectangles” Creative Cuts to cut a black panel and the second largest to cut a white panel. I blended Squeezed Lemonade and Fossilized Amber Distress Oxide Inks on to my white panel, only using the Fossilized Amber around the edges. I used my Distress Sprayer to distress my panel and splattered with gold metallic watercolour paint.
89
I started to adhered my leaves to my pumpkin flat with Scor-Tape, building across the way as I went. I popped my pumpkin and leaves up on my yellow panel with 3M Scotch Double Sided Foam tape and adhered my yellow panel to my black panel with Scor-Tape. I decided at the last minute to add two leaves under my pumpkin, one at each side with Scor-Tape as I felt it framed the pumpkin better and adhered my panel to my card base.
P47 LF Outside-In Stitched Pumpkin.jpg
Thanks for reading lovelies! I’ll see you next week with another card.
Claire
xo

Bumbleberry Papercrafts
Shop
Blog

Supplies

Stamps & Dies
Lawn Fawn “Outside-In Stitched Pumpkin” Dies
Lawn Fawn “Spooky Village” Stamp Set
Mama Elephant “Basic Rectangles” Creative Cuts

Inks
Gina K Amalgam Jet Black Ink
Carved Pumpkin Distress Oxide Ink
Vintage Photo Distress Oxide Ink
Squeezed Lemonade Distress Oxide Ink
Fired Brick Distress Oxide Ink
Fossilized Amber Distress Oxide Ink

Tools
Misti Stamping Tool

Adhesives
1/2″ Scor-Tape
3M Scotch Double Sided Foam Tape

Bumbleberry Papercrafts, Friendship Cards, Just Because Cards, Uncategorized

Simple Card Using Concord & 9th’s “Autumn Harvest” Stamp Set!

Hey lovelies!
It’s my favourite time of year! Crafting in Autumn and Winter just has a cozy feeling about it, wouldn’t you agree? This “Autumn Harvest” stamp set from Concord & 9th was the perfect set to ease me in to it this year!
1
I used my Misti stamping tool to stamp out the entire set with Gina K’s Amalgam Jet Black ink and coloured my images using my alcohol markers. I’m only using the pumpkin and acorn for this card, I added white details with a gel pen and fussy cut them out.
23
I used the largest of Mama Elephant’s “Basic Rectangles” Creative Cuts to cut a panel from black card stock and the second largest to cut a panel from kraft card stock. I splattered my kraft panel with some gold metallic paint to add texture and set aside to dry. I secured a strip of black card stock in my Misti and prepared it with my powder tool. I stamped my sentiment from Altenew’s “Coffee With A Splash” stamp set using Versamark ink, coated it in Lawn Fawn’s White embossing powder and set with my heat tool. I trimmed it down to size.
4
I wrapped some natural jute twine around my kraft panel near the bottom and adhered my images and sentiment with 3M Scotch Double Sided Foam Tape. I popped up my kraft panel on my black panel with foam tape also but used Scor-Tape to adhere everything to my card base.
P46 CA9 Autumn Harvest
Thanks for reading lovelies! I’ll see you next week with another card.
Claire
xo

Bumbleberry Papercrafts
Shop
Blog

Supplies

Stamps & Dies
Concord & 9th “Autumn Harvest” Stamp Set
Altenew “Coffee With A Splash” Stamp Set
Mama Elephant “Basic Rectangles” Creative Cuts

Inks
Gina K Amalgam Jet Black Ink

Tools
Misti Stamping Tool

Adhesives
3M Scotch Double Sided Foam Tape
1/2″ Scor-Tape

Friendship Cards, Halloween Cards, Uncategorized

Cute ‘You’re the pick of the patch’ Halloween Card Using Newton’s Nook “Boo-tiful Night” set!

Hey lovelies!
I’m well in the spooky spirit and back with another Halloween card using Newton’s Nook “Boo-tiful Night” set! These kitties are just too cute I can’t get enough of them! Halloween stamps are my weakness, especially when they have pumpkins!
40407557_228980391128188_7015983993191399424_n
I coloured these images using my Spectrum Noir alcohol markers, added rosy cheeks on the grey cats using a pink coloured pencil and finished up by adding some highlights using my white gelly roll pen. I fussy cut the images out by hand and moved on to my panel.
40566535_1176043342537479_8450729724069543936_n.jpg40400218_184070099062553_4227284272181936128_n
I cut some black card stock down to size using my guillotine trimmer. I used the Flying Bats stencil from Newton’s Nook to blend Carved Pumpkin Distress Oxide ink on to my panel, when I removed the stencil I sprinkled some clear embossing powder over the bats and set with my heat tool to give it a textured look and feel. I cut my window from my panel using Craftin Desert Divas Inside Scalloped Circle dies and removed the scalloped part so I was left with the stitched circle.
40400275_237081580308551_7666754826541203456_n40464201_1209811749159419_2182684886425403392_n.jpg
I cut my grass using the Outdoor Landscape dies from Craftin Desert Divas and ink blended it with Mowed Lawn Distress Ink, and I used the Hill Scene 2 Stencil to blend some Twisted Citron Distress Oxide ink on to my background panel to create my clouds. I distressed the background panel with my Distress sprayer, splattered it with more Twisted Citron ink using a paintbrush and dried it before prepping it with my powder tool applicator. I stamped my sentiment and the bat using Versafine Onyx Black ink, coated it in clear embossing powder and set it with my heat tool. I adhered everything in to place and finished my panel using some orange ribbon, as well as some black and white twine. I blended some Carved Pumpkin Distress Oxide ink over the edges of some white card stock slightly larger than my panel to frame my panel and adhered everything to my card base using score tape and double sided foam tape.
40400883_217772082424999_9114245997424279552_n
Thanks for reading lovelies! ❤
Are you all getting excited for Halloween yet? It seems people in the UK are more prepared for Christmas right now and I’m not ready to even think about that! What are your plans for Halloween this year? I’d love to know how you celebrate!

xo

Supplies:

Stamps, Dies & Stencils:
Newton’s Nook Boo-tiful Night Stamp Set
Newton’s Nook Flying Bats Stencil
Craftin Desert Divas Outdoor Landscape Dies
Craftin Desert Divas Hill Scene 2 Stencil
Craftin Desert Divas Inside Scalloped Circle Dies

Cards & Papers:
Hobbycraft White Premium Smooth Card Stock(300gsm)
Hobbycraft Black Premium Card Stock(180gsm)

Inks:
Carved Pumpkin Distress Oxide Ink
Mowed Lawn Distress Ink
Memento Tuxedo Black Ink
Versafine Onyx Black Ink

Embossing Powder:
Papermania Clear

Embellishments:
Sakura Gelly Roll Medium Point Pen(White)

Tools:
Tonic Studios Guillotine Trimmer
Sizzix Big Shot Machine
3M Scotch R Double Sided Foam Tape
EK Success Powder Tool Applicator
Papermania Heat Tool

Friendship Cards, Halloween Cards, Uncategorized

Hey there Pumpkin! Cute Halloween Card using Newton’s Nook “Boo-tiful Night” set!

Hey lovelies!
Halloween is fast approaching and it’s my absolute favourite! I’ve already been stamping out everything Halloween in my stash ready to colour for more cards! I had to break open this Newton’s Nook Boo-tiful Night set first though, the adorable cats and pumpkins were calling to me!
40487965_729713747368455_4835227697405755392_n.jpg40421306_516119335503500_4227047250116739072_n.jpg
When I get a new stamp set I like to stamp all of the images out using Memento Tuxedo Black ink to colour up ready for when I need them. I’m planning to make and send out a lot of Halloween cards this year so I know every one of these adorable images will go to use! I used my Spectrum Noir alcohol markers to colour these cute kitties, a pink coloured pencil to add their rosy cheeks and my white gelly roll pen to add highlights. I fussy cut them all out before moving on to my background.
40513323_309805693117735_5816478495903055872_n.jpg
I used the Newton’s Nook “Flying Bats” stencil and Carved Pumpkin Distress Oxide ink to blend the bats on to some white card stock, after removing the stencil I blended the ink darker over the edges of my panel and gently blended it in to the middle for the lighter area. I splattered some black watercolour paint on my panel and allowed it to dry, I just love how black and orange look together so I couldn’t resist!
40519023_332012790907778_3260364555485708288_n
I cut my grass using Craftin Desert Divas’ “Outdoor Landscape” dies, I blended some Mowed Lawn Distress ink along with some Fossilized Amber near the top to give the effect that the top of the grass is glowing from the orange light. I prepped the grass with my powder tool applicator, stamped my sentiment using Versamark ink, coated it in Altenew “Pure White” embossing powder and set with my heat tool. I adhered my grass panel to my background and popped the adorable little cat and pumpkins up with some foam tape. I created a card base from heavyweight white card stock, cut down some black paper to frame my panel and adhered everything to the card base. I finished up by adding some Ebony Black Nuvo drops to draw attention to my sentiment then set my card to dry in a safe place for 24 hours.
40261786_329151554505563_5250034376133050368_n
Thank you for reading lovelies!<3
This is my first Halloween card of the year and I’m so excited to make more! You can expect to see many more over the next month!

xo

Supplies:

Stamps, Dies & Stencils:
Newton’s Nook Boo-tiful Night Stamp Set
Newton’s Nook Flying Bats Stencil
Craftin Desert Divas Outdoor Landscape Dies

Card Stock:
Hobbycraft White Premium Smooth Card Stock (300gsm)
Hobbycraft Black Premium Card Stock (180gsm)

Inks:
Carved Pumpkin Distress Oxide Ink
Mowed Lawn Distress Ink
Fossilized Amber Distress Ink
Memento Tuxedo Black Ink
Versamark Ink

Embossing Powder:
Altenew Pure White Crisp

Embellishments:
Sakura Gelly Roll Medium Point Pen (White)
Ebony Black Nuvo Drops

Tools:
Tonic Studios Guillotine Trimmer
Sizzix Big Shot Machine
3M Scotch R Double Sided Foam Tape
EK Success Powder Tool Applicator
Papermania Heat Tool