Halloween Cards, Uncategorized

Simple Halloween Card Using Simon Says Stamp “If The Hat Fits”!

Hey lovelies!
Back to the Halloween cards today! Now I know not a lot of people have hours and hours to spend making their cards for every occasion, so today I thought I’d share a really simple way of making cute cards fast! The “If The Hat Fits” set from Simon Says Stamp is a really amazing set to achieve simple but fun cards, the hat images are a great size for a focal point and the larger sentiments compliment them perfectly!
1.jpg
I had previously stamped out this set using Memento Tuxedo Black ink as I knew I wanted to use it for this year’s Halloween cards. I did some quick colouring using my Spectrum Noir alcohol markers and added details/highlights with my white gelly roll pen.
Spectrum Noir markers used:
Hat: LG5, LG3, LG2
Ribbon: CR7, OR2, FS9
2.jpg
I fussy cut out my image, I used my craft knife to cut the little piece between the bend of the hat and the ribbon. I cut down a panel for my card and blended in a circular motion towards the bottom left using Squeezed Lemonade Distress Oxide ink (I just love how greens and yellows compliment each other!), sprayed it with my distress sprayer before cleaning up any excess water with a paper towel. I splattered my panel with black watercolour paint and Twisted Citron Distress Oxide ink using a paintbrush and some water then allowed it to completely dry. Once it was dry I prepped my panel with my EK Success powder tool, I stamped my sentiment at a slight angle using Versafine Onyx Black ink, coated it in clear embossing powder and set with my heat tool. I stamped a couple of the stars from the set with Versafine ink to draw attention to my sentiment. I adhered the hat to my panel using double sided foam tape to add some dimension. Finally I framed my panel using black card stock and adhered to my card base using double sided score tape!
41467991_1218905581585412_4900616160715735040_n.jpg
Thanks for reading lovelies!
How are your Halloween crafts coming along? Have you started or do you prefer to move straight on to Christmas? For me this is the season I wait for every year with crafting, watching all my favourite movies and decorating our space to fit the theme!

xo

Supplies:

Stamps:
Simon Says Stamp “If The Hat Fits” Stamp Set

Card:
Hobbycraft White Premium Smooth Card(300gsm)
Hobbycraft Black Premium Card(180gsm)

Inks:
Squeezed Lemonade Distress Oxide Ink
Twisted Citron Distress Oxide Ink
Versafine Onyx Black Ink
Memento Tuxedo Black Ink

Embossing Powder:
Papermania Clear

Embellishments:
Sakura Gelly Roll Medium Point Pen(White)

Tools:
Tonic Studios Guillotine Trimmer
3M Scotch R Double Sided Foam Tape
EK Success Powder Tool Applicator
Papermania Heat Tool
Ranger Mini Ink Blending Tool

Advertisements
Halloween Cards, Uncategorized

Halloween Card Using Leftover Supplies from Love From Lizi 2017 Card Kit!

Hey lovelies!
My crafty friends who know me, know I LOVE to hoard Halloween supplies. Some things are just too pretty to use! I’ve made it my mission this year to use all the things that I’ve been hoarding for quite some time now, some of those supplies come from the Love From Lizi Halloween card kit from last year! I couldn’t bring myself to use most of the pretty papers and bits and bobs last year, so here is the first of the cards I’ve made with what I have left over!
1.jpg
I cut down two white panels one for my base and the other to ink smoosh and stamp. I ink smooshed my smaller panel with Twisted Citron and a little bit of Evergreen Bough Distress Oxide ink, drying between layers. Once it was completely dry I splattered some of the Evergreen Bough ink on to my ink smooshed panel and my white panel with a paint brush, I also splattered some black watercolour paint on my white panel. I stamped my skulls from the Love from Lizi “Punny Bones” set in a pattern using Versafine Onyx Black ink. I ran it through my die cutting machine with the largest of my Inside Scalloped Octagon dies from Craftin Desert Divas and removed the inside piece to use on my card. I ran the same die through once more using black card stock to create my frame.
2
I cut a piece of the green and black patterned paper in to a large ribbon to go down the left side of my card and adhered everything in to place using double sided score tape.
3.jpg
I trimmed the top off of the Octagon using my paper trimmer. I prepped a thin strip of black card stock with my EK Success powder tool and stamped my sentiment from Newton’s Nook’s “Boo-tiful Night” stamp set in Versamark ink, coated it in white embossing powder and set with my heat tool. I used my scissors to create a fish tail at the end of my sentiment banner and popped it up on my panel using double sided foam tape. I cut a panel from the patterned paper slightly larger than my base panel of my card and adhered both to my card base using double sided score tape. I finished up by framing my sentiment with some Ebony Black Nuvo drops.
41323161_463128994197779_587316574201839616_n.jpg
Thanks for reading lovelies! Do you hoard certain craft supplies too? I feel like I need to use some up now and again so my craft room isn’t bursting at the seams!

xo

Supplies:

Stamps & Dies:
Love From Lizi “Punny Bones” Stamp Set
Newton’s Nook “Boo-tiful Night” Stamp Set
Craftin Desert Divas Inside Scalloped Octagon Dies

Cards & Papers:
Hobbycraft White Premium Smooth Card(300gsm)
Hobbycraft Black Premium Card(180gsm)

Inks:
Twisted Citron Distress Oxide Ink
Evergreen Bough Distress Oxide Ink
Versafine Onyx Black Ink
Versamark Watermark Ink

Embossing Powder:
Altenew Pure White

Embellishments:
Ebony Black Nuvo Crystal Drops

Tools:
Tonic Studios Guillotine Trimmer
Sizzix Big Shot Machine
3M Scotch R Double Sided Foam Tape
EK Success Powder Tool Applicator
Papermania Heat Tool

Friendship Cards, Halloween Cards, Uncategorized

Simple Halloween Card Using Lawn Fawn “Trick or Treat” set!

Hey lovelies!
I’ve been digging through my craft supplies and pulling out everything fall/Halloween related! If you know me, you know I love a good small stamp that I can make quick and easy backgrounds with! These candy corn from Lawn Fawn are no exception to that – look at their cute little faces! I couldn’t resist making a simple card using them!
1
I trimmed down a panel from white card stock and stamped my candy corn in a random pattern all over using Memento Tuxedo Black ink. I usually do these backgrounds with watercolour but I love how vivid my Spectrum Noir pens make the candy corn in this case!
23.jpg
When colouring I usually work from darkest to lightest:
Orange section: CR7 -> OR3 -> OR2
Yellow section: GB4 -> GB3 -> LY1
4.jpg
I added shadows using my GG1 Spectrum Noir marker, and highlights with my white gelly roll pen. I love adding these little details as I feel like it makes them stand out more!
5.jpg
I used the smallest of my Inside Scalloped Circle dies and cut it from white card stock, removing the middle piece that I would be using for my sentiment. I blended Squeezed Lemonade Distress Oxide ink on to my sentiment piece, before blending some Carved Pumpkin Distress Oxide ink around the edges for some dimension. I dried the ink with my heat tool and prepped with my EK Success powder tool applicator. I stamped my sentiment from Newton’s Nook’s “Boo-tiful Night” set using Versafine Onyx Black ink, coated it in clear embossing powder and set it with my heat tool. I picked out some orange ribbon and backed it with double sided score tape, I adhered that directly to my panel and popped my sentiment up with some foam tape. I backed my panel with double sided score tape and adhered to my card base!
40684855_473130436520396_6874617270652370944_n
Thank you for reading lovelies! ❤
This style of card is one of my favourites to make, especially if you don’t have a lot of time to craft! Quick and simple yet still adorable!

xo

Supplies:

Stamps, Dies & Stencils:
Lawn Fawn Trick or Treat Stamp Set
Newton’s Nook Boo-tiful Night Stamp Set
Craftin Desert Divas Inside Scalloped Circle Dies

Cards & Papers:
Hobbycraft White Premium Smooth Card Stock(300gsm)

Inks:
Memento Tuxedo Black Ink
Versafine Onyx Black Ink
Carved Pumpkin Distress Oxide Ink
Squeezed Lemonade Distress Oxide Ink

Embossing Powder:
Papermania Clear

Embellishments:
Sakura Gelly Roll Medium Point Pen(White)

Tools:
Tonic Studios Guillotine Trimmer
Sizzix Big Shot Machine
3M Scotch R Double Sided Foam Tape
EK Success Powder Tool Applicator
Papermania Heat Tool
Ranger Mini Ink Blending Tool

Friendship Cards, Halloween Cards, Uncategorized

Cute ‘You’re the pick of the patch’ Halloween Card Using Newton’s Nook “Boo-tiful Night” set!

Hey lovelies!
I’m well in the spooky spirit and back with another Halloween card using Newton’s Nook “Boo-tiful Night” set! These kitties are just too cute I can’t get enough of them! Halloween stamps are my weakness, especially when they have pumpkins!
40407557_228980391128188_7015983993191399424_n
I coloured these images using my Spectrum Noir alcohol markers, added rosy cheeks on the grey cats using a pink coloured pencil and finished up by adding some highlights using my white gelly roll pen. I fussy cut the images out by hand and moved on to my panel.
40566535_1176043342537479_8450729724069543936_n.jpg40400218_184070099062553_4227284272181936128_n
I cut some black card stock down to size using my guillotine trimmer. I used the Flying Bats stencil from Newton’s Nook to blend Carved Pumpkin Distress Oxide ink on to my panel, when I removed the stencil I sprinkled some clear embossing powder over the bats and set with my heat tool to give it a textured look and feel. I cut my window from my panel using Craftin Desert Divas Inside Scalloped Circle dies and removed the scalloped part so I was left with the stitched circle.
40400275_237081580308551_7666754826541203456_n40464201_1209811749159419_2182684886425403392_n.jpg
I cut my grass using the Outdoor Landscape dies from Craftin Desert Divas and ink blended it with Mowed Lawn Distress Ink, and I used the Hill Scene 2 Stencil to blend some Twisted Citron Distress Oxide ink on to my background panel to create my clouds. I distressed the background panel with my Distress sprayer, splattered it with more Twisted Citron ink using a paintbrush and dried it before prepping it with my powder tool applicator. I stamped my sentiment and the bat using Versafine Onyx Black ink, coated it in clear embossing powder and set it with my heat tool. I adhered everything in to place and finished my panel using some orange ribbon, as well as some black and white twine. I blended some Carved Pumpkin Distress Oxide ink over the edges of some white card stock slightly larger than my panel to frame my panel and adhered everything to my card base using score tape and double sided foam tape.
40400883_217772082424999_9114245997424279552_n
Thanks for reading lovelies! ❤
Are you all getting excited for Halloween yet? It seems people in the UK are more prepared for Christmas right now and I’m not ready to even think about that! What are your plans for Halloween this year? I’d love to know how you celebrate!

xo

Supplies:

Stamps, Dies & Stencils:
Newton’s Nook Boo-tiful Night Stamp Set
Newton’s Nook Flying Bats Stencil
Craftin Desert Divas Outdoor Landscape Dies
Craftin Desert Divas Hill Scene 2 Stencil
Craftin Desert Divas Inside Scalloped Circle Dies

Cards & Papers:
Hobbycraft White Premium Smooth Card Stock(300gsm)
Hobbycraft Black Premium Card Stock(180gsm)

Inks:
Carved Pumpkin Distress Oxide Ink
Mowed Lawn Distress Ink
Memento Tuxedo Black Ink
Versafine Onyx Black Ink

Embossing Powder:
Papermania Clear

Embellishments:
Sakura Gelly Roll Medium Point Pen(White)

Tools:
Tonic Studios Guillotine Trimmer
Sizzix Big Shot Machine
3M Scotch R Double Sided Foam Tape
EK Success Powder Tool Applicator
Papermania Heat Tool

Craftin Desert Divas!, Friendship Cards, Thank You Cards, Uncategorized

Craftin Desert Divas August Release: Blog Hop!

Hey lovelies!
Yesterday marked the official release of the new Craftin Desert Divas’ August products and day 1 of the blog hop! If you missed any of the fun and inspiration from the DT members yesterday, you can head to the CDD August release blog hop day 1 & product reveal post to catch up! However if you’ve come here from Maaike’s blog post then you’re in the right place, if you’ve got lost you can head over to the Craftin Desert Divas August release blog hop day 2 post to find where you were again!
Today I’m recapping the cards I created and shared during sneak peek week for you! I’m a huge lover of fall, ever since I was a kid I’ve loved watching the leaves change colour and the air gets crisper, which is why I’m so excited about this release! Crisp leaves, fall friends and more makes this release as sweet as it gets. Once you’re finished hopping along, be sure to head over to the Craftin Desert Divas Shop to grab your special discount – 5% off until August 19th! ❤
The first card I shared was using the adorable new Grateful Trolls stamp set and the Hill Scene 2 stencil! For more details on this card you can head to my blog post here.
Grateful Trolls 1 August 2018
For the second card I shared I used the super sweet Dam Shame stamp set! How sweet is this little beaver?! For more details on this card you can head to my blog post here.
Dam Shame 1 August 2018
Thank you for stopping by lovelies! What are your favourite products from the new August release?! I know, it’s such a hard decision! I had so much fun playing with these cute trolls and sweet beavers!
36901571_10160798146590271_7415108762773487616_o

xo
August Release Day 2 Hop List!
Start: Craftin Desert Divas
Jan
Angelica (Guest Designer)
Elaine
Maaike
You are here: Claire-Anne
Next: Courtney
Mari
Candice
Ashlee
Michelle
Sherry
Holly
Charlotte
Rachel
New Release Blog Hop.png

Craftin Desert Divas
Shop
39301800_660512880996060_4892009647549972480_n

♥ Please note that the links to products and the CDD shop are affiliate links. If you choose to make a purchase through these links I will receive a small commission at no extra cost to you. ♥
Craftin Desert Divas!, Friendship Cards, Uncategorized

Craftin Desert Divas August Release – Sneak Peek Day 3!

Hey lovelies!
It’s day 3 of Craftin Desert Divas’ August release sneak peek week! Today there is a whole lotta cuteness being showcased for your inspiration, so be sure to head over to the Craftin Desert Divas blog post to see what the other DT members have created for you!
Today I’m showcasing the Dam Shame set with this sweet little beaver and bug!
1.jpg
I started by cutting a panel from white card stock using the Torn Paper Dies, I blended over the polygon stencil using Broken China and Squeezed Lemonade Distress Oxide ink having them overlap in the middle to create the green shade. I lightly sprayed my panel with my Distress Sprayer bottle to give it a distressed look and dried the excess water droplets with a paper towel. I put down some of the Broken China Distress Oxide ink on a stamping block, mixed with a little water and splattered over the surface too for an extra layer before setting it aside to dry.
2.jpg
I stamped out my cute little beaver and bug using Memento Tuxedo Black ink before moving on to colouring with my Spectrum Noir alcohol markers.
3.jpg
I used TN5, TN3, TN1, GB2 & GB1 for the beaver’s fur. I used a combination of BG5, TN5 & TN3 for his tail and I filled his nose in with IG5. I used TN5 & TN3 for the twigs, along with LG5 & LG3 for the leaves. For his glasses I blended DR2 & CR7 and finished him up with a little GG1 to shade his eyes and just under his top lip before adding my highlights using my white gelly roll pen. I coloured the body of the bug with GB4 & LY1 and the wings with GT1 & IB1 and added a few small highlights along the top of his head and wings.
4.jpg
I cut a panel using white card stock and used the large Torn Paper die to cut a window so I could inlay my ink blended panel. I prepped my panel with my powder tool applicator before stamping my sentiment in Versafine Onyx Black ink, coated it in clear embossing powder and set it with my heat tool. I fussy cut my characters out and popped them up with some foam tape to the left of my sentiment.
5.jpg
I adhered my panel to my card base using some foam tape and added some glow in the dark Nuvo drops in the shade Blue Crush to finish my card, leaving them to set for a full 24 hours in a safe space.
Dam Shame 1 August 2018.jpg
Thank you for stopping by lovelies! This set is just too cute I can’t wait for you to see it all! Remember to head to the August release event on facebook and click “going” if you haven’t already! Myself and the other DT members are sharing our projects in there and the Craftin Desert Divas Gallery all throughout release week!

CDD-ReleaseAugust2018-Facebook-Event-Cover-Photo

xo

Craftin Desert Divas
Shop
CDD Sneak Peek Day 3 Blog Post!

Supplies
Links to new products will be added when they become available!
Dam Shame Stamp Set
Polygon Stencil
Torn Paper Dies
Broken China Distress Oxide Ink
Squeezed Lemonade Distress Oxide Ink
Memento Tuxedo Black Ink
Powder Tool Applicator
Nuvo Glow In The Dark Drops – Blue Crush
White Gelly Roll Medium Point Pen

♥ Please note that the links to products and the CDD shop are affiliate links. If you choose to make a purchase through these links I will receive a small commission at no extra cost to you. ♥
36901571_10160798146590271_7415108762773487616_o

 

 

 

Craftin Desert Divas!, Friendship Cards, Just Because Cards, Thank You Cards, Uncategorized

Craftin Desert Divas August Release – Sneak Peek Day 2!

Hello lovelies!
August release week with Craftin Desert Divas is finally here! I know some of you have been just as excited as I am, so I’m here to showcase a card I made using the brand new adorable set Grateful Trolls and the new Hill Scene 2 stencil! I am madly in love with this set and I know all of you will be too! Make sure you click “going” to the facebook event for this release so you don’t miss out on any of the fun!
1.jpg
I started off by cutting down a panel from white card stock. I blended in clouds using the Hill Scene 2 stencil, Carved Pumpkin and Squeezed Lemonade Distress Oxide ink, changing up which side of the stencil I use each time and sometimes even flipping it over! I lightly sprayed the panel with my Distress Sprayer bottle when I had covered the entire panel and mopped up the excess using a paper towel.
2.jpg
I stamped my cute little troll using Memento Tuxedo Black ink and coloured her using my Spectrum Noir alcohol markers. I added some rosy cheeks with a pink pencil, added three little dots to each cheek using my white gelly roll pen before adding highlights to the rest of my image. Once they had dried I fussy cut my image out and set it aside for a bit.
3.jpg
I cut a strip of white card stock to fit across my panel for my sentiment and to ground my troll later on. I prepped the strip with my powder tool applicator, stamped my sentiment in Versafine Onyx Black ink, coated it in clear embossing powder and set it with my heat tool. I adhered the strip to my panel using double sided tape.
4.jpg
I adhered my troll to my panel using double sided foam tape before backing my entire panel with the same tape and adhering to my card base. I adhered a couple of sequins from the Fall Harvest mix using liquid adhesive to finish this card up and give it a little sparkle!
Grateful Trolls 1 August 2018
Thank you for stopping by lovelies! I can’t wait for you to see the rest of the release and the full sets! They’re too cute to resist! What are your thoughts on what you’ve seen this week so far?! Are you planning your ideas yet? 😉
Remember to stop by the Craftin Desert Divas Blog post to see what amazing peeks and inspiration the other DT members have in store for you! ❤

CDD-ReleaseAugust2018-Facebook-Event-Cover-Photo.png

xo

Craftin Desert Divas
Shop
CDD Sneak Peek Day 2 Blog Post!

Supplies
Links to new products will be added when they become available!
Grateful Trolls Stamp Set
Hill Scene 2 Stencil
Carved Pumpkin Distress Oxide Ink
Squeezed Lemonade Distress Oxide Ink
Memento Tuxedo Black Ink
Versafine Onyx Black Ink
Powder Tool Applicator
White Gelly Roll Medium Point Pen
Fall Harvest Sequins

♥ Please note that the links to products and the CDD shop are affiliate links. If you choose to make a purchase through these links I will receive a small commission at no extra cost to you. ♥
36901571_10160798146590271_7415108762773487616_o

 

 

Anniversary Cards, Birthday Cards, Friendship Cards, Get Well Soon Cards, Uncategorized

Simple Elegant Cards Using Spellbinders Shapeabilities Dies From The “Flower Garden” Collection!

Hey lovelies! ❤ I’m back with a couple more cards using the Spellbinders Shapeabilities dies, this time from the Flower Garden collection by Sharyn Sowell! I tried to keep these cards similar while changing things up just a little, I’ve been on a white and gold kick lately and these dies fit that style perfectly! 

~Tools and products used will be listed at the end of this blog post!~

34258697_2123865487641276_3355361999348301824_n

“Botanical Butterfly”

34306531_2123866050974553_2293815382797975552_n.jpg

34416393_2123866110974547_787100216380620800_n

I created my A2 card base and cut my panel slightly smaller from white heavyweight card stock. I prepped my panel with my EK Success powder tool so my embossing powder would only stick to where I wanted it to. I took a thin embossing folder I got from a magazine a little while ago and coated the inside with Tsukineko Versamark ink (on the side with no ridges! This is so the embossed part would remain mostly white with only a little bit of gold looking slightly distressed on it!). I placed it towards the bottom of my panel and ran it through my die cutting machine before coating it in Papermania gold embossing powder and setting it with my heat tool. Once the embossing had cooled I took some gold peel offs from Love From Lizi and adhered them at the top and bottom of the gold embossed strip to neaten up the edges and give it an extra little shine. I then covered the embossed strip and the bottom of the panel in post it tape to protect it while I splattered some gold and white gold watercolour paint at the top of the panel. 

Once the splatter was dry I removed the post it tape and prepped the white space at the bottom of the card with my powder tool once again. I stamped my sentiment in Tsukineko Versafine onyx black ink in the bottom right corner of my panel, covered it in Papermania clear embossing powder and set with my heat tool. 

I grabbed some pretty floral pearlescent patterned paper from my stash and used the Botanical  Butterfly etched dies to cut out the body and wings using my die cutting machine (I ran the wings through twice so I could double them up as I knew I wanted some dimension here). Once all my pieces were ready, I took some strong double sided score tape and adhered the bottom wing, body and antenna with it over the left side of the embossed strip. I put some of the same double sided score tape on the top wing (where the wing joins to the butterfly) and used some mini foam squares to pop up the end of the wing to give some dimension. To finish I backed the entire panel in double sided foam tape and adhered to my card base. 

“Botanical Dragonfly”

34342585_2123865870974571_6366252026531151872_n.jpg

34189155_2123865964307895_9041766298295468032_n.jpg

Once again I went with an A2 card base with a slightly smaller panel from heavyweight white card stock. This time I protected a strip of my panel along the bottom first and splattered again with gold and white gold metallic watercolour paint. I removed the post it tape once the splatter was dry and went with the gold peel offs on their own, choosing two different widths to work with this time. I placed a two of the medium sizes and placed a thinner one in the middle, to give that same sense of separation I have on the first card.

I used the same floral paper as I did with the butterfly, to cut out the botanical dragonfly using my die cutting machine. Again, I ran the wings through twice only this time I turned my paper over so I could create the wings for both sides of the dragonfly. I adhered the two lower wings to my panel using my double sided tape as I wanted them to be flat, for the two top wings I adhered the part that would be behind the dragonfly’s body with score tape and popped up the ends with mini foam squares. I adhered the dragonfly’s body down the middle of my wings, using score tape directly on top of the wings and a mini foam square to support the back of the dragonfly’s head. 

I took some black card stock and prepped it with my heat tool, I stamped my sentiment from Altenew’s Carousel stamp set in Tsukineko Versamark ink, coated it in Altenew pure white embossing powder and set it with my heat tool. I cut the sentiment in to a thin strip using my paper trimmer and adhered it across my dragonfly using the double sided score tape. I then backed the entire panel in double sided foam tape and adhered to my card base to finish up!

34337250_2123865804307911_2615676744446771200_n

Thanks for reading lovelies! I had a lot of fun playing with these dies, I want to say a special thanks to Spellbinders for reaching out to me once again and giving me this wonderful opportunity! The dies themselves are absolutely beautiful and great for making beautiful cards year round, no matter the occasion! The detail in these dies specifically had me in awe! Which of the two dies is your favourite? 

xo

~Supplies & Links~

**Not all supplies can be listed as they’re from local craft stores, but you can easily find similar things online as they’re pretty common!**

DIES:

Spellbinders Shapeabilities Botanical Butterfly Etched Dies 

Spellbinders Shapeabilities Botanical Dragonfly Etched Dies

STAMPS:

Altenew Carousel 

CARDSTOCK/PAPER: 

Hobbycraft White Premium Smooth Card Stock (300gsm)

INKS:

Tsukineko Versafine Onyx Black Ink

Tsukineko Versamark “Watermark” Ink

POWDER TOOL:

EK Success Powder Tool

FOAM TAPE:

3M Scotch R Double Sided Foam Tape

DIE CUTTING MACHINE:

Sizzix Big Shot

PAPER TRIMMER:

Tonic Studios Guillotine Trimmer

EMBOSSING POWDER:

Altenew Pure White

Papermania Clear

HEAT TOOL:

Papermania Multi-Purpose Heat Tool

WATERCOLOUR PAINT:

Gansai Tambi “Starry Colors”

EMBELLISHMENTS:

Love From Lizi Gold Peel Offs

Friendship Cards, Just Because Cards, Uncategorized, Watercolour Cards

Sprinkled With Love Card Using Some Odd Girl “Sweet & Salty”!

Hey lovelies! ❤ I’m back with another card using the Sweet & Salty stamp set from Some Odd Girl, I personally love this stamp set as the images are such a great size for a focal image! The weather has been heating up more and more lately as summer creeps in, what more perfect time for ice cream?!

~Tools and products used will be listed at the end of this blog post!~

33865948_2120361884658303_7347164441735069696_n.jpg

I created my card base using heavyweight white card stock, and cut a panel of patterned paper from the Pink and Main “Be Brave” 6×6 paper pack to be slightly smaller than my card base. I chose the colourful triangle paper because it reminded me of bunting used for summer parties, how appropriate! I cut some strips from white card stock, I prepped one of the strips with my EK Success Powder tool so the embossing powder would only stick to the area I stamped. I stamped my sentiment “Sprinkled With Love” in Versafine onyx black ink, coated it in Papermania clear embossing powder and set with my heat tool. I then adhered the strips across the patterned paper using double sided foam tape, being careful to line them up with the edges of the patterned paper.

I stamped my ice cream cone images using Ranger Archival jet black ink as I planned to watercolour them this time around. My favourite flavour of ice cream is mint, so I felt I had to put that front and centre! I decided to go with chocolate and vanilla for the other two so they weren’t all competing too much on the card. Once they were dry I fussy cut them out by hand and adhered them together first using my regular tape runner, then adhered them beside my sentiment on my card!

33943289_2120361944658297_1831684469480751104_n.jpg

Thank you for reading lovelies! ❤ This was such a quick card to make, probably one of my quickest! I love how simple yet colourful it is at the same time, and I think it’s perfect to send to a loved one in summer! What’s your favourite flavour of ice cream?!

xo

~Supplies & Links~

**Not all supplies can be listed as they’re from local craft stores, but you can easily find similar things online as they’re pretty common!**

STAMPS:

Some Odd Girl “Sweet & Salty”

CARDSTOCK/PAPER:

Hobbycraft White Premium Smooth Card Stock (300gsm)

Pink and Main Be Brave 6×6 Paper Pack

INKS:

Tsukineko Versafine Onyx Black Ink

Ranger Archival Jet Black Ink

POWDER TOOL:

EK Success Powder Tool

PAPER TRIMMER:

Tonic Studios Guillotine Trimmer

FOAM TAPE:

3M Scotch R Double Sided Foam Tape

EMBOSSING POWDER:

Papermania Clear

HEAT TOOL:

Papermania Multi-Purpose Heat Tool

Friendship Cards, Just Because Cards, Uncategorized

In Omnia Paratus Card Using Ink Road Stamps “Stars Hollow”!

Hey lovelies! ❤

Today I want to share with you the second card I’ve made with this gorgeous stamp set from Ink Road Stamps! Anybody who watches Gilmore Girls will know of the Life and Death Brigade and the latin term ‘In Omnia Paratus’ which means ‘ready for anything’! Some of my favourite moments in the show happened with Rory and the Life and Death Brigade, although I’m still team Jess! With that being said, I couldn’t NOT make this card!

~Tools and products used will be listed at the end of this blog post!~

33377003_2113442525350239_8902136490595713024_n.jpg

I made my tall card base and cut a panel slightly smaller from white card stock, I wanted it to represent the jump made by Rory and Logan with the rest of the group so I felt it was most appropriate! I cut a cloud shape stencil from white card stock again, and began inking my panel from the top with my Ranger/Tim Holtz Salty Ocean Distress Ink. I kept blending the colour all the way down to the bottom of my panel, once finished I distressed it with my Distress Spray bottle.

For the little umbrellas I stamped them with Tsukineko Memento tuxedo black ink on white card stock, then coloured them in rainbow colours using my Spectrum Noir alcohol markers. I took a small circle die and cut them out using my Big Shot machine.

For my sentiments I treated some black card stock with my EK Success powder tool, so the embossing powder wouldn’t stick to anywhere else apart from where I stamped. I stamped both sentiments in Tsukineko Versamark ink, covered them in Altenew pure white embossing powder and set them with my heat tool before cutting them in to thin strips using my paper trimmer. I used my scissors to create a little fish tail banner for the “you jump, I jump” sentiment.

For assembly I began by cutting down some black matte paper to create a border around my panel on the card, adhering it to my card base with my regular tape runner. I then wrapped some blue and white twine around the left side of my panel, adhering it to the back with some washi tape. I backed the umbrella circles and sentiments with double sided foam tape, adhered the umbrellas over the twine and put the sentiments in place where I had planned. I finished by backing the entire panel in foam tape and adhering to my card base.

33306867_2113442595350232_1684195614658658304_n.jpg

Thanks for reading lovelies! ❤ Are any of you here Gilmore Girls fans? I’ve honestly lost count how many times I’ve watched the show from beginning to end, including the newest four episodes released on Netflix! The Ink Road Stamp is now open again! Head on over using the links below to check it out, and see the new products for yourself! ❤

xo

~Supplies & Links~

**Not all supplies can be listed as they’re from local craft stores, but you can easily find similar things online as they’re pretty common!**

STAMPS:

Ink Road Stamps “Stars Hollow”

INK ROAD DISCOUNTS:

50% off your FIRST order at the Ink Road Stamps shop!

Referral code (10% off for existing customers!): claireanne10

CARDSTOCK/PAPER:

Hobbycraft White Premium Smooth Card Stock (300gsm)

INKS:

Tsukineko Versamark “Watermark” Ink

Ranger/Tim Holtz Salty Ocean Distress Ink

Tsukineko Memento Tuxedo Black Ink

POWDER TOOL:

EK Success Powder Tool

FOAM TAPE:

3M Scotch R Double Sided Foam Tape

INK BLENDING:

Ranger/Tim Holtz Ink Blending Tool

DIE CUTTING MACHINE:

Sizzix Big Shot

PAPER TRIMMER:

Tonic Studios Guillotine Trimmer

EMBOSSING POWDER:

Altenew Pure White

SPRAY BOTTLES:

Ranger/Tim Holtz Distress Sprayer