Birthday Cards, Uncategorized

Hooray! All Yeti Another Year Older? Birthday Shaker Using Craftin Desert Divas Products!

Hey lovelies!
It was my best friend in the world Kit’s birthday last month (you should go check out her blog if you’re a Disney or cosplay lover), so of course I had to whip up a shaker especially for her! We don’t live close to each other, which means we don’t get to see each other nearly enough. For most of us in the crafting community sending our handmade cards/gifts is our way of showing love to those we’re closest to!
We’re more like sisters than friends, and our sense of humour definitely reflects that. So I just had to use these cute images with the cheekiness of the “all yeti another year older?” sentiment as a little reminder to her that we’re growing older together!
1
I stamped these cute yetis from Craftin Desert Divas “Yeti To Party” set using Memento Tuxedo Black ink, coloured them using my Spectrum Noir alcohol markers and fussy cut them out. I added some rosy cheeks with a pink pencil and details with my white gelly roll pen.
Spectrum Noir markers used:
Yeti: IB1 (face and legs) BG3 & GG1 (horns) GT1 (nails) GG1 (shading on fur)
Presents: CR2, FS8, GB1, LY1, LG1 & LG2
2.jpg3.jpg
I cut a panel from heavy weight white card stock using the Crazy Stitched Frame dies, and cut a window out using the Inside Scalloped Circle dies both from Craftin Desert Divas. I removed the scalloped frame part of the window as I just wanted a simple circle this time. I cut another panel of white card and blended it with Shaded Lilac Distress Oxide ink for the background of my window before spraying it with my distress sprayer and drying up the excess water with a paper towel.
4
I took a piece of scrap card stock I had leftover from a previous project big enough for the sentiment die. I blended Broken China and Shaded Lilac Distress Oxide inks to create an ombre effect, I distressed it using my distress sprayer and mopped up the excess water. I took the “Hooray” sentiment die from the Torn Paper dies by Craftin Desert Divas and ran it through my die cutting machine.
5.jpg
I adhered my die cut sentiment using Ranger Multi Medium Matte adhesive and set a stamping block on top until it was completely dry. I stamped “All YETI another year older?” below my die cut sentiment using Versafine Onyx Black ink. After backing my window with acetate I adhered my yetis to the acetate (slotted just under the bottom of my window) using some double sided score tape and got ready to create my shaker panel.
6.jpg
I used double sided foam tape to surround the back of my window and backed the rest of my panel with it too. I used my EK Success powder tool around the edges of the foam tape on the inside section of my circle, I feel this helps the sequins move around easier! I used Pastel Paradise and True Love sequins from Craftin Desert Divas to fill my shaker, removed the backing from my foam tape and adhered my ink blended background panel to seal it all in. I backed my panel with double sided score tape and adhered to my card base!
41295327_545162972591557_1864153554655117312_n
Thanks for reading lovelies! I’ll be resuming my Halloween posts on the next one, I’m definitely not bored of them yet! ❤

xo

Supplies:

Stamps & Dies:
Craftin Desert Divas “Yeti To Party” Stamp Set
Craftin Desert Divas Crazy Stitched Frame Dies
Craftin Desert Divas Inside Scalloped Circle Dies
Craftin Desert Divas Torn Paper Dies

Card:
Hobbycraft White Premium Smooth Card(300gsm)

Inks:
Shaded Lilac Distress Oxide Ink
Broken China Distress Oxide Ink
Versafine Onyx Black Ink

Embellishments:
Craftin Desert Divas Pastel Paradise Sequins
Craftin Desert Divas True Love Sequins
Sakura Gelly Roll Medium Point Pen(White)

Tools:
Tonic Studios Guillotine Trimmer
Sizzix Big Shot Machine
3M Scotch R Double Sided Foam Tape
EK Success Powder Tool Applicator
Ranger Mini Ink Blending Tool
Ranger/Tim Holtz Distress Sprayer

Advertisements
Friendship Cards, Just Because Cards, Uncategorized

In Omnia Paratus Card Using Ink Road Stamps “Stars Hollow”!

Hey lovelies! ❤

Today I want to share with you the second card I’ve made with this gorgeous stamp set from Ink Road Stamps! Anybody who watches Gilmore Girls will know of the Life and Death Brigade and the latin term ‘In Omnia Paratus’ which means ‘ready for anything’! Some of my favourite moments in the show happened with Rory and the Life and Death Brigade, although I’m still team Jess! With that being said, I couldn’t NOT make this card!

~Tools and products used will be listed at the end of this blog post!~

33377003_2113442525350239_8902136490595713024_n.jpg

I made my tall card base and cut a panel slightly smaller from white card stock, I wanted it to represent the jump made by Rory and Logan with the rest of the group so I felt it was most appropriate! I cut a cloud shape stencil from white card stock again, and began inking my panel from the top with my Ranger/Tim Holtz Salty Ocean Distress Ink. I kept blending the colour all the way down to the bottom of my panel, once finished I distressed it with my Distress Spray bottle.

For the little umbrellas I stamped them with Tsukineko Memento tuxedo black ink on white card stock, then coloured them in rainbow colours using my Spectrum Noir alcohol markers. I took a small circle die and cut them out using my Big Shot machine.

For my sentiments I treated some black card stock with my EK Success powder tool, so the embossing powder wouldn’t stick to anywhere else apart from where I stamped. I stamped both sentiments in Tsukineko Versamark ink, covered them in Altenew pure white embossing powder and set them with my heat tool before cutting them in to thin strips using my paper trimmer. I used my scissors to create a little fish tail banner for the “you jump, I jump” sentiment.

For assembly I began by cutting down some black matte paper to create a border around my panel on the card, adhering it to my card base with my regular tape runner. I then wrapped some blue and white twine around the left side of my panel, adhering it to the back with some washi tape. I backed the umbrella circles and sentiments with double sided foam tape, adhered the umbrellas over the twine and put the sentiments in place where I had planned. I finished by backing the entire panel in foam tape and adhering to my card base.

33306867_2113442595350232_1684195614658658304_n.jpg

Thanks for reading lovelies! ❤ Are any of you here Gilmore Girls fans? I’ve honestly lost count how many times I’ve watched the show from beginning to end, including the newest four episodes released on Netflix! The Ink Road Stamp is now open again! Head on over using the links below to check it out, and see the new products for yourself! ❤

xo

~Supplies & Links~

**Not all supplies can be listed as they’re from local craft stores, but you can easily find similar things online as they’re pretty common!**

STAMPS:

Ink Road Stamps “Stars Hollow”

INK ROAD DISCOUNTS:

50% off your FIRST order at the Ink Road Stamps shop!

Referral code (10% off for existing customers!): claireanne10

CARDSTOCK/PAPER:

Hobbycraft White Premium Smooth Card Stock (300gsm)

INKS:

Tsukineko Versamark “Watermark” Ink

Ranger/Tim Holtz Salty Ocean Distress Ink

Tsukineko Memento Tuxedo Black Ink

POWDER TOOL:

EK Success Powder Tool

FOAM TAPE:

3M Scotch R Double Sided Foam Tape

INK BLENDING:

Ranger/Tim Holtz Ink Blending Tool

DIE CUTTING MACHINE:

Sizzix Big Shot

PAPER TRIMMER:

Tonic Studios Guillotine Trimmer

EMBOSSING POWDER:

Altenew Pure White

SPRAY BOTTLES:

Ranger/Tim Holtz Distress Sprayer

Friendship Cards, Just Because Cards, Uncategorized

Coffee Friendship Card Using Ink Road Stamps “Stars Hollow”!

Hello lovelies! ❤

Yup you read that right, I’m back with yet ANOTHER coffee card! When will I bore of making caffeine related cards? Never! Especially when it ties in to my all time favourite show, Gilmore Girls!

~Tools and products used will be listed at the end of this blog post!~

33340909_2112849122076246_4776675868548268032_n.jpg

I created my card base from white card stock, followed by cutting some grey card stock to fit the base leaving a slight white border at either side. I used an embossing folder I got free in a magazine to create the textured pattern on the grey card, but before running it through I covered the inside of the embossing folder with Versamark ink (on the smoother panel with no ridges) so the embossed areas would be lighter than the areas without embossing. I feel like this creates a subtle contrast but it definitely adds something extra!

I cut a white strip to fit across the width of the grey panel and used my EK Success powder tool to treat the card so my embossing powder would only stick to the areas I stamped. I took the small solid coffee cup stamp from the Stars Hollow set and stamped with Versamark ink, coated it in Papermania Gold embossing powder and set it with my heat tool. I repeated this all along the white strip.

For the sentiment I treated some white card stock again with my powder tool, stamped my sentiment “Coffee please, in a VAT” (because who doesn’t need that right?!) in Versafine Onyx Black ink, covered with Papermania clear embossing powder and set it with my heat tool. I took a small circle die and cut it out using my Big Shot machine.

Here is where I began the assembly of my card, I backed the grey panel with foam tape and adhered it to my card base. I used my regular tape runner to adhere the strip with the coffee cups to the grey panel, and foam tape once again to pop up the circular sentiment in the centre of the strip. I chose some copper and gold sequins and adhered them to my card using Ranger Multi Medium Matte adhesive for a little extra shine!

33207370_2112849212076237_794424879377022976_n

Thank you for reading lovelies! ❤ I am absolutely IN LOVE with this stamp set from Ink Road Stamps, right now the shop is closed in preparation for a BIG product reveal, but I will edit the link to the stamp set when it is back up and running as well as my referral code for 50% off your first order! If you’re already a customer of Ink Road Stamps you can always use my code “claireanne10” for 10% off your order! For now though, head on over to the website and sign up to be notified when the shop reopens, keep your eyes open for that product reveal! Exciting stuff!

xo

~Supplies & Links~

**Not all supplies can be listed as they’re from local craft stores, but you can easily find similar things online as they’re pretty common!**

INK ROAD STAMPS:

Sign up to be notified when the shop opens here!

CARDSTOCK/PAPER:

Hobbycraft White Premium Smooth Card Stock (300gsm)

INKS:

Tsukineko Versamark “Watermark” Ink

Tsukineko Versafine Onyx Black Ink

EMBOSSING POWDER:

Papermania Gold

Papermania Clear

POWDER TOOL:

EK Success Powder Tool

PAPER TRIMMER:

Tonic Studios Guillotine Trimmer

FOAM TAPE:

3M Scotch R Double Sided Foam Tape

HEAT TOOL:

Papermania Multi-Purpose Heat Tool

DIE CUTTING MACHINE:

Sizzix Big Shot

Friendship Cards, Just Because Cards, Thank You Cards, Uncategorized, Watercolour Cards

Donut You Know Friendship Card Using Some Odd Girl “Sweet & Salty”!

Hello lovelies! ❤

Hands up if you have a sweet tooth?! I tend to side with the saltier things in life but donuts are one exception to that rule! I was gifted this cute stamp set by my friend Anna a little while ago, knowing if it’s cute and food related I’m in LOVE!

~Tools and products used will be listed at the end of this blog post!~

32941456_2108447172516441_7529101214898716672_n

I knew I wanted to work with the donut stamp from this set as I had a sentiment from Lawn Fawn’s “Sweet Friends” set that would go great with it! I began by creating my card base and adhering some black matte paper on top, then cut my panel slightly smaller from watercolour paper. I treated the watercolour paper with my EK Success powder tool as I was planning to heat emboss my images. I used Versafine Onyx Black ink to stamp my donuts all over my panel, coated them in clear embossing powder from papermania then set them with my heat tool.

I moved on to colouring my images, I knew I wanted the frosting on the donuts to be pretty bright so I decided to watercolour it with distress inks. I decided on a blue and pink ink and used the alternate colour of sprinkles for each donut. I used my watercolour paint for the actual donut underneath as I didn’t have a distress ink that would fit the colour.

For my sentiment I treated some black card stock with my powder tool, used my Versamark ink to stamp my sentiment and heat embossed it in Altenew pure white embossing powder. I then cut them in to thin sentiment strips and cut the edges at an angle. I adhered them to my panel using my regular tape runner. To finish the card I backed the donut panel with foam tape and adhered to my card base.

32897531_2108447159183109_4922373661878386688_n.jpg

Thanks for reading lovelies! ❤ I can’t wait to play with this set again in the future, the images are a great size and are too cute to just sit away in storage! I hope you’ve all had a wonderful weekend! 🙂

xo

~Supplies & Links~

**Not all supplies can be listed as they’re from local craft stores, but you can easily find similar things online as they’re pretty common!**

STAMPS:

Some Odd Girl “Sweet & Salty”

Lawn Fawn “Sweet Friends”

CARDSTOCK/PAPER:

Hobbycraft White Premium Smooth Card Stock (300gsm) 

INKS:

Ranger/Tim Holtz Salty Ocean Distress Ink

Ranger/Tim Holtz Picked Raspberry Distress Ink

Tsukineko Versafine Onyx Black Ink

Tsukineko Versamark “Watermark” Ink

POWDER TOOL:

EK Success Powder Tool

PAPER TRIMMER:

Tonic Studios Guillotine Trimmer

FOAM TAPE:

3M Scotch R Double Sided Foam Tape

EMBOSSING POWDER:

Altenew Pure White

Papermania Clear

HEAT TOOL:

Papermania Multi-Purpose Heat Tool

Birthday Cards, Uncategorized

Cute Alien Card Using Lawn Fawn “Beam Me Up!”

Hello lovelies! ❤

Today I’m sharing this space themed card using Lawn Fawn’s Beam Me Up stamp set. I have a soft spot for anything to do with space, and who could resist these adorable little aliens?! I used some stamps Lawn Fawn’s Out Of This World set too, specifically the planets! 🙂

~Tools and products used will be listed at the end of this blog post!~

32080321_2095411943819964_725680143938355200_n.jpg

I started by stamping out my images and colouring them with my Spectrum Noir alcohol markers (although for the glass in the space ship I did use a light blue coloured pencil as I don’t currently have a colourless blender!). I wanted them to be in bright, fun colours as I felt this card would be perfect for a kid’s birthday! For the alien in the space ship I stamped the ship first, creating a mask using a post-it note and stamped the alien over top to give the illusion he’s sitting in the ship! Once I had my images all coloured I added some details and highlights with my white gel pen before fussy cutting them out by hand. For the beam coming out of the space ship I knew I wanted it to be transparent, so the cake would be visible while the alien is sneaking it on to their ship! Sneaky! I achieved this by heat embossing on some heat resistant acetate with my Altenew pure white embossing powder then fussy cut around the embossed lines. I adhered the beam directly on to the back of the space ship so it would be popped up on the same level as the ship when I finished the card.

I created my card base and cut a panel slightly smaller from white card stock. I adhered some black matte paper to my card base for the black border. I wanted the card to be on the fun and colourful side but still with that galaxy sky feel, I knew I was going to adhere a circle panel to the bottom of the card for the sentiment (and for those sneaky aliens to be standing on!). I left a lighter blue aura around where the “moon” would be and blended purple/pink and blue together for the top to make it darker. I sprayed the background with my Ranger/Tim Holtz distress sprayer, then splattered the background with white paint and metallic watercolour paint from my Gansai Tambi “Starry Colors” palette for a little shimmer.

I die cut a circle panel from white card stock and adhered it to the panel, cutting off any excess from the sides. I prepped it with my EK Success powder tool so embossing powder would only stick to where I stamped my sentiment. I stamped my sentiment using versafine onyx black ink and coated it with Papermania clear embossing powder before setting it with my heat tool until it was smooth and shiny. I adhered all my images where I wanted them using my usual tape runner apart from the space ship with the acetate attached, and the earth which I popped up using foam tape. To finish I backed the entire panel in foam tape and adhered to my card base.

32130591_2095411910486634_1529831075541417984_n.jpg

Thanks for reading lovelies! ❤ I loved getting back in to colouring with my alcohol markers with this card, it feels like I’ve been mainly focused on watercolour lately while trying to get used to the medium and then falling madly in love with it. For all you crafty geniuses, which medium is your absolute favourite to use? I want to keep trying new things as I move forward! ❤

xo

~Supplies & Links~

**Not all supplies can be listed as they’re from local craft stores, but you can easily find similar things online as they’re pretty common!**

STAMPS:

Lawn Fawn “Beam Me Up”

Lawn Fawn “Out Of This World”

CARDSTOCK/PAPER:

Hobbycraft White Premium Smooth Card Stock (300gsm) 

INKS:

Ranger/Tim Holtz Salty Ocean Distress Ink

Ranger/Tim Holtz Picked Raspberry Distress Ink

Ranger/Tim Holtz Seedless Preserves Distress Ink

Tsukineko Versafine Onyx Black Ink

FOAM TAPE:

3M Scotch R Double Sided Foam Tape

WATERCOLOUR PAINT:

Gansai Tambi “Starry Colors”

POWDER TOOL:

EK Success Powder Tool

INK BLENDING:

Ranger/Tim Holtz Ink Blending Tool

DIE CUTTING MACHINE:

Sizzix Big Shot

PAPER TRIMMER:

Tonic Studios Guillotine Trimmer

EMBOSSING POWDER:

Altenew Pure White

Papermania Clear

Anniversary Cards, Friendship Cards, Just Because Cards, Uncategorized

Simple Anniversary Card Using Simon Says Stamp “Seeing Stars”!

Hello lovelies! ❤

Today marks 8 years since my fiancé and I started dating, so I thought today I’d share the card I made for our anniversary with you! Hubby to be is a lil obsessed with stars, so I thought it was fitting to use Simon Says Stamp’s – Seeing Stars stamp set! I’ve been meaning to use this set for a while, I was just waiting for inspiration to hit!

~Tools and products used will be listed at the end of this blog post!~

31960952_2095400360487789_5910926231196401664_n

I started by creating my card base and adhering a black matte paper on top, I knew I wanted to mimic a night sky effect with this card (for obvious reasons!) so I felt like the black would tie everything in nicely. I cut my panel down to size and picked out the three distress ink colours I was planning to use (colours and links at the end of this blog post!). I blended the darker colours mostly towards the outside, making sure to switch between colours and overlapping my blending to make the result as smooth as I wanted it to be. I distressed the panel with some water and dried the water spots with a paper towel. I then splattered my panel with Gansai Tambi “Starry Colors” metallic watercolour paints before leaving to air dry.

While that was air drying I moved on to my sentiment, I treated the black card stock with my EK Success powder tool so the embossing powder wouldn’t stick to anywhere I didn’t want it. I stamped my sentiment “When we’re together, I see stars” with Tsukineko Versamark ink and coated it in Papermania Gold embossing powder then set it with my heat tool. I used a circle die to cut out my sentiment using my Big Shot machine.

By this time my panel was dry! Once again using my powder tool I coated my entire panel. I stamped my stars and constellations randomly all over using Versamark ink and the same gold embossing powder as before, once heat set all that was left to do was put the card together! I wrapped two pieces of twine around my panel (adhering them to the back with some washi tape!) and adhered my sentiment circle on top using foam tape. I then backed the entire panel in foam tape and adhered to the card base, to finish I adhered tiny gems to my card using Ranger Multi Medium Matte adhesive to give that extra little bit of sparkle!

31947075_2095400347154457_8700804632965808128_n

Thanks for reading lovelies! ❤ I really love how this card turned out, I know my fiancé will love it too! Let me know what you think in the comments below! 🙂

xo

~Supplies & Links~

**Not all supplies can be listed as they’re from local craft stores, but you can easily find similar things online as they’re pretty common!**

STAMPS:

Simon Says Stamp “Seeing Stars”

CARDSTOCK/PAPER: 

Hobbycraft White Premium Smooth Card Stock (300gsm)

FOAM TAPE:

3M Scotch R Double Sided Foam Tape

WATERCOLOUR PAINT:

Gansai Tambi “Starry Colors”

POWDER TOOL:

EK Success Powder Tool

INK BLENDING:

Ranger/Tim Holtz Ink Blending Tool

PAPER TRIMMER:

Tonic Studios Guillotine Trimmer

EMBOSSING POWDER:

Papermania Gold

INKS:

Ranger/Tim Holtz Salty Ocean Distress Ink

Ranger/Tim Holtz Picked Raspberry Distress Ink

Ranger/Tim Holtz Seedless Preserves Distress Ink

Tsukineko Versamark Watermark Ink

HEAT TOOL:

Papermania Multi-Purpose Heat Tool

Birthday Cards, Uncategorized

Cute Dragon Birthday Card Using Mama Elephant Stamps!

Hello lovelies! ❤ If you follow my Instagram (@brodiecreations) you may know I recently got a couple of new stamp sets, including the Me and My Dragon and Dragon Wishes sets from Mama Elephant! These stamps are so adorable I had to break them out for my little brother’s birthday card this year! He turns 10 today and I’m completely gobsmacked at how fast he’s growing up!

~Tools and products used will be listed at the end of this blog post!~

31819882_2090089877685504_5742487788624805888_n

I stamped my images using Tsukineko Memento Tuxedo Black ink as I wanted to use my Spectrum Noir alcohol markers to colour the dragons for this card. I decided to stick to blues and greens for the smaller dragons so the reds and oranges in the larger dragon would be the main focus. Once my images were all coloured, I added some white highlights as well as some dotting for details using my white gel pen then fussy cut them out leaving a thin white border.

I created my card base from white card stock and cut my panel slightly smaller on all sides. I knew as the colour of the images were quite bold I wanted to go for a softer sky background. I used my Ranger/Tim Holtz Salty Ocean and Picked Raspberry distress inks to softly ink blend some colour on to my background, I didn’t need the coverage to be perfect as I felt like it added to the feel of the card. I distressed it slightly with my distress sprayer and dried the droplets with a paper towel. I die cut some clouds from white card stock and adhered them on to my panel using my usual tape runner, trimming off any excess that hung over the edges.

For the sentiment I took some black card stock and prepped it with my EK Success powder tool, stamped my sentiment with Tsukineko Versamark ink and heat embossed it with Altenew Pure White embossing powder. I trimmed it in to a small strip and cut a fish tail at the end before adhering it to the left side of my card just above where I wanted the main dragon to go.

To finish up I adhered the smaller dragons using my tape runner, then backed the large dragon, flame and the cake with foam tape then adhered them to my panel. I backed the entire panel in foam tape and adhered it directly to my card base before dotting some Nuvo Glow Drops all over.

31755436_2090089884352170_8542663889882447872_n

Thank you for reading lovelies! ❤ I had so much fun playing with these new stamps! I’m definitely going to be getting a lot of use out of these cuties, so expect more posts using them in the future! The Nuvo Glow Drops were a first for me, I’ve had them in my stash for a little while but I never found quite the right time to use them. I wasn’t sure what to expect but wow! I didn’t expect them to glow so bright!

31749425_2090068451020980_6105116344192073728_n

xo

~Supplies & Links~

**Not all supplies can be listed as they’re from local craft stores, but you can easily find similar things online as they’re pretty common!**

STAMPS:

Mama Elephant “Me and My Dragon”

Mama Elephant “Dragon Wishes”

CARDSTOCK/PAPER:

Hobbycraft White Premium Smooth Card Stock (300gsm)

INKS:

Ranger/Tim Holtz Salty Ocean Distress Ink

Ranger/Tim Holtz Picked Raspberry Distress Ink

Tsukineko Versamark Watermark Ink

Tsukineko Memento Tuxedo Black Ink

FOAM TAPE:

3M Scotch R Double Sided Foam Tape

POWDER TOOL:

EK Success Powder Tool

INK BLENDING:

Ranger/Tim Holtz Ink Blending Tool

PAPER TRIMMER:

Tonic Studios Guillotine Trimmer

EMBOSSING POWDER:

Altenew Pure White

EMBELLISHMENTS:

Nuvo Glow Drops “Blue Crush”

Friendship Cards, Just Because Cards, Thank You Cards, Uncategorized, Watercolour Cards

Sweet Friendship Card using Lawn Fawn “Sweet Friends” Stamp Set

Hey lovelies! ❤

Today I want to share with you a card I made using the Lawn Fawn – Sweet Friends stamps and coordinating die set. Cute food and animal images are my weaknesses when it comes to card making, so I knew from the adorable sweet treats images and punny sentiments in this set I was going to be in love!

~Tools and products used will be listed at the end of this blog post!~

31189793_2079625112065314_1199116944481976320_n

I started by stamping out the little s’more images and the little heart trio with Ranger Archival jet black ink on to some watercolour paper, while making this card I was just in the process of trying to become more comfortable with watercolour painting images/backgrounds. Once I painted them and was happy enough with the results, I used the coordinating die set to cut out my images using my Big Shot. I then stamped their little faces and drew in some blushing cheeks using coloured pencil (I didn’t stamp the faces at first as I wasn’t sure if I was going to use them on this card).

Once my images were ready I ink blended on to a piece of white scrap card stock using the Ranger/Tim Holtz Salty Ocean distress ink and used my spray bottle to give it the distressed look I wanted. Once dry, I decided to cut out a laced heart using the medium die from the Lawn Fawn Lacy Heart Stackable die set. I played about with placement to figure out where I wanted my little characters to go as well as the little hearts from the set, once I was happy I adhered the s’mores with some 3M double sided foam tape and the hearts with some Ranger multi medium matte adhesive.

Choosing a patterned paper was probably one of the things that took me the longest here, I just couldn’t decide! But I ended up going with this kraft paper with the white foil polkadots as I felt it suited the card best. I cut some black matte paper for my card base to size as well as the patterned paper, I adhered them using my usual tape runner adhesive and glued the blue heart with my little characters close to the top of my card in the centre.

For the sentiment I took a strip of black card stock and ran my EK Success powder tool over it, then heat embossed “I need S’MORE friends like you” with Altenew pure white embossing powder. I cut it to the size I needed and adhered it under the blue heart, and that was the card finished!

31143959_2079625098731982_8258129122635546624_n

Thank you for reading lovelies! ❤ Overall this was a pretty simple card, but I love the end result! I definitely plan to make more cards in the future using some of the other images in the set, they’re just too cute to resist!

xo

~Supplies & Links~

**Not all supplies can be listed as they’re from local craft stores, but you can easily find similar things online as they’re pretty common!**

STAMPS:

Lawn Fawn “Sweet Friends”

DIES:

Lawn Fawn “Sweet Friends” Coordinating Dies

Lawn Fawn Lacy Heart Stackables

INK:

Tsukineko Versamark Watermark Ink

Ranger Archival Jet Black Ink

Ranger/Tim Holtz Salty Ocean Distress Ink

POWDER TOOL:

EK Success Powder Tool

EMBOSSING POWDER:

Altenew Pure White

CARDSTOCK/PAPER:

Hobbycraft White Premium Smooth Card Stock (300gsm)

DCWV “Black and White Foil”

FOAM TAPE:

3M Scotch R Double Sided Foam Tape

STAMPING PLATFORM:

Tonic Studios/Tim Holtz Stamping Platform

PAPER TRIMMER:

Tonic Studios Guillotine Trimmer

DIE CUTTING MACHINE:

Sizzix Big Shot

ADHESIVE:

Ranger Multi Medium Matte

BLENDING TOOL:

Ranger/Tim Holtz Ink Blending Tool

Friendship Cards, Just Because Cards, Uncategorized, Watercolour Cards

Friendship Card using Simon Says Stamp “If The Hat Fits”!

Hello lovelies! ❤

Happy May! This year is going by so quickly isn’t it?! To me it still feels like Christmas and New Year was last week!

Today I’m sharing a card I made for my best friend using the Simon Says Stamp – If The Hat Fits stamp set, who said witch hats were only for Halloween? I think we all have that little bit of magic in us all year round!

~Tools and products used will be listed at the end of this blog post!~

31129383_2078024325558726_347695070243192832_n

After creating my card base and topping it with some matte black paper, I cut down a piece of watercolour paper to the size I needed and adhered it to the base of my stamping platform using washi tape and the magnets provided down the right side of the panel. I knew I wanted to do a lot of stamping down the left side of the card, so this gave me all the room I needed! I stamped three of the hats on some Simon Says Stamp masking paper and cut them out, I wanted to stack the hats on top of each other so in order to avoid all the lines crossing messily this is a necessary step. In order for the hats to look stacked, I started stamping from the top of the pile using Ranger Archival Jet Black ink, masking with the appropriate mask each time and worked my way down until I was close to the bottom of the panel.

Now my image is ready to paint! I tried to stick to a Witch-ish colour palette as it suits my friend and I’s aesthetic, though you can use any colours you’d like to with these hats! I painted the actual hats themselves first, leaving some drying time before moving on to the ribbons/trims as to avoid any overflow and mudding of paints. I used my Gansai Tambi “Starry Colors” paints for the buckles. Once my panel was dry I removed it from my stamping platform and placed it on my glass craft mat to splatter with black paint for that extra grungy/distressed feel!

Leaving the splattering to dry naturally I moved on to my sentiment, after using my powder tool, I heat embossed “You say witch like it’s a bad thing” with white embossing powder on black card stock, then die cut it with a small circle die from my stash. For the inside sentiment I went with “If the hat fits, get the matching shoes and broom” in Ranger Archival Jet Black ink once again, knowing my friend will see the comical side.

To finish off the card I adhered a black ribbon down the right side of the panel, attached my die cut sentiment circle with foam tape towards the bottom of the panel then using my regular tape runner I adhered the panel to the card base!

31093294_2078024372225388_5202122156225331200_n

Thank you for reading lovelies! ❤ This card took a little while longer to make due to all the masking, but I definitely feel like it was worth it! This is possibly one of my favourite cards I’ve made to date!

xo

~Supplies & Links~

**Not all supplies can be listed as they’re from local craft stores, but you can easily find similar things online as they’re pretty common!**

STAMPS:

Simon Says Stamp “If The Hat Fits”

CARD/PAPER:

Hobbycraft White Premium Smooth Card Stock (300gsm)

EMBOSSING POWDER:

Altenew Pure White

POWDER TOOL:

EK Success Powder Tool

FOAM TAPE:

3M Scotch R Double Sided Foam Tape

PAPER TRIMMER:

Tonic Studios Guillotine Trimmer

STAMPING PLATFORM:

Tonic Studios/Tim Holtz Stamping Platform

WATERCOLOUR PAINT:

Gansai Tambi “Starry Colors”

INK:

Ranger Archival Jet Black Ink

Tsukineko Versamark Watermark Ink

MASKING:

Simon Says Stamp Masking Paper